{"product_id":"toys-mccoy-mens-snoopy-udt-recovery-team-trucker-style-baseball-cap-with-side-mesh-panels-and-snapback-adjustment-made-in-japan-tma2624-030-black","title":"TOYS McCOY Men's Snoopy \"UDT Recovery Team\" Trucker-Style Baseball Cap with Side Mesh Panels and Snapback Adjustment, Made in Japan (TMA2624, 030 Black)","description":"TOYS McCOY Men's Snoopy \"UDT Recovery Team\" Trucker-Style Baseball Cap with Side Mesh Panels and Snapback Adjustment, Made in Japan (TMA2624, 030 Black)\u003cbr\u003e\u003cbr\u003e\n\n\u003ca href=\"https:\/\/rodeo-japan-pine-avenue.com\/collections\/toys-mccoy\"\u003eTOYS McCOY\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\nThis men's Snoopy mesh cap is made in Japan by TOYS McCOY as a custom version of the brand's original mesh-cap design. Its baseball-cap silhouette combines a polyurethane foam front panel, nylon mesh side panels, and cotton twill rear panels, together with a rear snapback adjuster. Inspired by the teams that recovered Apollo spacecraft and their crews after atmospheric reentry and splashdown, the design features \"U.S.S. HORNET\" front lettering and a Snoopy \"UDT RECOVERY TEAM\" patch on the left side mesh. Combining trucker-cap-inspired styling, bold visual appeal, and practical everyday wearability, the cap offers a distinctive yet versatile addition to a contemporary casual wardrobe.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSize and Fit Guide:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\nGender: Men.\u003cbr\u003e\u003cbr\u003e\n\nThe cap is offered in one adjustable size. A plastic snapback adjuster at the rear allows the head opening to be adjusted in fixed increments within the approximate range listed below.\u003cbr\u003e\u003cbr\u003e\n\nThe cap has a slightly deeper fit and a slightly taller crown. The front rises above the forehead, while the side-mesh panels and cotton-twill rear panels curve gradually toward the top to form a rounded dome. The front has moderate fullness supported by the soft, springy foam, and the supple side and rear panels conform to the head to create a rounded, three-dimensional silhouette.\u003cbr\u003e\u003cbr\u003e\n\nFit varies depending on head shape, the adjustment setting, and personal preference. Please use the head-circumference range and visor measurement below as your primary sizing references, and compare them with your own head circumference and a similar cap you already wear. The depth of a familiar cap can also help you assess your preferred fit. The stated head-circumference range is an approximate wearing guide and does not guarantee fit.\u003cbr\u003e\u003cbr\u003e\n\nThe head-circumference range indicates the approximate wearing size accommodated by the adjuster. The visor length is a measurement of the cap itself.\u003cbr\u003e\u003cbr\u003e\n\n\u003chr style=\"border: none; border-top: 1px solid #cccccc; margin: 20px 0;\"\u003e\n\n\u003cstrong\u003eIn inches\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eTagged Size ONE SIZE\u003c\/strong\u003e\u003cbr\u003e\nApproximate Head Circumference Range: 22.8\"-24.0\"\u003cbr\u003e\nVisor Length: Approximately 2.8\"\u003cbr\u003e\u003cbr\u003e\n\n\u003chr style=\"border: none; border-top: 1px solid #cccccc; margin: 20px 0;\"\u003e\n\n\u003cstrong\u003eIn centimeters\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eTagged Size ONE SIZE\u003c\/strong\u003e\u003cbr\u003e\nApproximate Head Circumference Range: 58-61cm\u003cbr\u003e\nVisor Length: Approximately 7cm\u003cbr\u003e\u003cbr\u003e\n\n\u003chr style=\"border: none; border-top: 1px solid #cccccc; margin: 20px 0;\"\u003e\n\nVisor Length: Measured in a straight line from the midpoint of the seam joining the visor to the front panel to the outer tip of the visor.\u003cbr\u003e\u003cbr\u003e\n\nHead Circumference Range: The approximate wearing-size range provided by the rear snapback adjustment. Actual fit varies with head shape, the adjustment setting, and personal preference.\u003cbr\u003e\u003cbr\u003e\n\nMade in Japan.\u003cbr\u003e\n- Brand new, in unused condition.\u003cbr\u003e\n- Slight measurement differences may occur between individual caps and depending on the measuring method.\u003cbr\u003e\n- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFive-Panel Crown with a Fabric-Covered Top Button\u003c\/strong\u003e\u003cbr\u003e\nThe crown is assembled from five panels: one wide front panel, one nylon mesh panel on each side, and two cotton-twill panels at the rear. Each panel is cut to narrow gradually from the lower edge toward the top. Sewing the adjacent panel edges together shapes the flat materials into a three-dimensional dome that follows the head.\u003cbr\u003e\u003cbr\u003e\n\nThe five panel joins converge radially at a single point at the top of the crown. A fabric-covered top button finishes this central meeting point.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003ePolyurethane Foam Front Panel with Partial Upper Shaping\u003c\/strong\u003e\u003cbr\u003e\nThe front panel is made from polyurethane foam with a soft, sponge-like feel and springy resilience. The foam supports the fullness of the front while allowing it to remain flexible.\u003cbr\u003e\u003cbr\u003e\n\nA vertical, dart-like shaping feature extends downward from the upper center of the front panel and ends partway down the front. This shaping takes up material in the upper portion, allowing the single wide panel to curve gently from side to side and round naturally toward the top of the crown.\u003cbr\u003e\u003cbr\u003e\n\nBecause the shaping line stops above the lower edge, the lower front remains a continuous surface without a full-length center join through the area where the lettering is embroidered directly onto the front panel.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eNylon Side-Mesh Panels\u003c\/strong\u003e\u003cbr\u003e\nNylon mesh panels are positioned on both sides of the crown to provide ventilation. The mesh has enough body to retain its form while remaining supple and flexible, allowing it to follow the sides of the head as it connects the front panel to the rear panels.\u003cbr\u003e\u003cbr\u003e\n\nMesh is used only at the sides. The rear retains a solid cotton-twill fabric surface, combining the baseball-cap shape with the ventilation provided by the side panels.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eTwo Cotton-Twill Rear Panels\u003c\/strong\u003e\u003cbr\u003e\nThe back of the crown consists of two cotton-twill panels. The fabric shows the diagonal ridges characteristic of a twill weave and combines moderate body with suppleness.\u003cbr\u003e\u003cbr\u003e\n\nA vertical center-back seam joins the two panels. Their shaped construction forms a rounded rear section that follows the back of the head.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eCotton-Twill Visor with Four Rows of Stitching\u003c\/strong\u003e\u003cbr\u003e\nCotton twill is also used for the visor. The visor is relatively flat overall with a slight curve. It has sufficient firmness to hold its shape while retaining enough flexibility for a gentle curve to be added gradually by hand.\u003cbr\u003e\u003cbr\u003e\n\nFour rows of stitching follow the rounded outer contour of the visor. Four corresponding rows are visible on the underside, securing the upper and lower sides together and helping stabilize the visor's shape.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eRear Opening and Plastic Snapback Adjuster\u003c\/strong\u003e\u003cbr\u003e\nAn adjustment opening is formed at the lower rear of the crown, with rounded upper corners. A plastic snapback adjuster is attached at the two sides of this opening.\u003cbr\u003e\u003cbr\u003e\n\nRaised pegs on one strap fit into the holes on the other. Changing the overlap between the straps adjusts the circumference of the head opening in fixed increments.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eUnlined Crown Interior\u003c\/strong\u003e\u003cbr\u003e\nThe crown does not have a full lining. The mesh openings and the reverse surfaces of the individual panels remain visible from the inside. Leaving the side mesh uncovered by a separate lining preserves the ventilation through these panels.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThree Interior Seam-Covering Tapes over Five Panel Joins\u003c\/strong\u003e\u003cbr\u003e\nThe five interior seams joining the crown panels are covered by three separate lengths of tape. Two of these tapes each run continuously from the lower edge on one side of the crown, over the top, and down to the lower edge on the opposite side. Each of these two continuous tapes covers a pair of panel joins.\u003cbr\u003e\u003cbr\u003e\n\nThe third tape extends from the upper edge of the rear adjustment opening to the top of the crown, covering the center-back seam between the two rear panels. The three tapes meet and overlap at the top, forming five radiating sections that extend downward along the five panel joins.\u003cbr\u003e\u003cbr\u003e\n\nThe tapes cover the seam allowances and cut edges, limiting exposed edges and lifting seam allowances while finishing the joins between the different crown materials. They also reduce direct contact between the panel seam allowances and the head.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eTape-Securing Stitches and Parallel Exterior Topstitching\u003c\/strong\u003e\u003cbr\u003e\nEach interior tape is secured by one row of stitching along each long edge, giving each tape two lengthwise rows. These stitches hold the tape over the seam allowances, help prevent shifting or lifting, and stabilize the panel joins.\u003cbr\u003e\u003cbr\u003e\n\nThe securing stitches also pass through the crown panels. On the outside, they appear as parallel rows of topstitching positioned on either side of each panel join. The same stitching secures the interior seam finish and outlines the five-panel construction on the exterior.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eCloth Inner Band around the Head Opening\u003c\/strong\u003e\u003cbr\u003e\nA cloth inner band follows the lower inside edge of the crown, except at the rear adjustment opening. It forms the sweatband area in contact with the forehead and sides of the head, limiting direct contact with the crown material and lower-edge seam allowances.\u003cbr\u003e\u003cbr\u003e\n\nThe band also covers the seam allowances around the crown's lower edge, including the point where the front panel and visor are joined. By supporting the perimeter of the head opening, it helps stabilize the lower edge of the cap.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eDirect Front Lettering and Snoopy \"UDT RECOVERY TEAM\" Left-Side Patch\u003c\/strong\u003e\u003cbr\u003e\nThe front panel carries four lines of direct embroidery reading \"U.S.S. HORNET,\" \"ASTRONAUT,\" \"SNOOPY,\" and \"RECOVERY TEAM.\" The aircraft-carrier name and team lettering are arranged in a layout reminiscent of an Apollo cap.\u003cbr\u003e\u003cbr\u003e\n\nA round embroidered patch is sewn onto the mesh panel on the wearer's left side. The design combines Snoopy with a parachute and places the wording \"UDT RECOVERY TEAM\" across the lower portion.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eDirect TOYS McCOY Logo Embroidery on the Visor\u003c\/strong\u003e\u003cbr\u003e\nThe \"TOYS McCOY\" logo is embroidered directly onto the upper surface of the visor on the wearer's left side.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eWoven TOYS McCOY Brand Label on the Rear Panels\u003c\/strong\u003e\u003cbr\u003e\nA woven TOYS McCOY brand label is sewn onto the cotton-twill rear panels above the snapback adjustment opening.\u003cbr\u003e\u003cbr\u003e\n\nThe sewn-on woven label completes the combination of direct lettering on the front, an embroidered patch on the left side mesh, and direct logo embroidery on the visor.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eTOYS McCOY and PEANUTS Interior Labels\u003c\/strong\u003e\u003cbr\u003e\nTOYS McCOY and PEANUTS labels are attached inside the cap, identifying the cap's brand and its character-themed customization.\u003cbr\u003e\u003cbr\u003e\n\nThe TOYS McCOY label includes the wording \"ONE SIZE FITS ALL,\" indicating the adjustable snapback design. Please refer to the approximate head-circumference range in the size guide when assessing fit.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003e030 Black Color Layout\u003c\/strong\u003e\u003cbr\u003e\nThe front panel, cotton-twill visor, nylon side-mesh panels, and cotton-twill rear panels are all black.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eMade in Japan\u003c\/strong\u003e\u003cbr\u003e\nThis Japanese-made TOYS McCOY cap combines a five-panel crown, polyurethane foam front, nylon side mesh, cotton-twill rear panels and visor, and an adjustable plastic snapback.\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eCare Instructions\u003c\/strong\u003e\u003cbr\u003e\nWhen shaping the visor, make small, gradual adjustments by hand within its natural flexibility. Forceful bending or creating a sharp crease may place stress on the material.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eImportant Notes\u003c\/strong\u003e\u003cbr\u003e\n- Our online inventory is shared with our physical retail store. As a result, changes in store inventory may not always be reflected immediately on the website.\u003cbr\u003e\n- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.\u003cbr\u003e\n- Slight measurement differences may occur between individual caps and depending on the measuring method.\u003cbr\u003e\n- The approximate 58-61cm head-circumference range is a general wearing guide and does not guarantee fit. Actual fit varies depending on head shape, the adjustment setting, and personal preference.\u003cbr\u003e\n- Some areas of the embroidery may appear to have skipped stitches or broken threads. These appearances are part of the intended design specifications. Please take this into consideration before ordering.\u003cbr\u003e\n- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.\u003cbr\u003e\u003cbr\u003e\n","brand":"RODEO-JAPAN Pine-Avenue Clothes shop","offers":[{"title":"Default Title","offer_id":48351027298540,"sku":"tma2624-030-black","price":19800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4343\/4396\/files\/tma2624-01.jpg?v=1789280372","url":"https:\/\/rodeo-japan-pine-avenue.com\/ko\/products\/toys-mccoy-mens-snoopy-udt-recovery-team-trucker-style-baseball-cap-with-side-mesh-panels-and-snapback-adjustment-made-in-japan-tma2624-030-black","provider":"RODEO-JAPAN Pine-Avenue Clothes shop","version":"1.0","type":"link"}