6903 ZANTER JAPAN Men's Casual Fashion Lightweight Parka with Classical and Fashionable Forms of the Vintage Anorak Parka / Mens Outdoor Style Light Shell Outer Jacket / Anorak windbreaker / This lightweight pullover hooded jacket is made in Japan and produced by ZANTER JAPAN. This product is made especially for Japanese market. Body pattern is inspired by the anorak parka provided to ZANTER JAPAN used by a Japanese expedition who first climbed Mount Manaslu in 1956. With the inspiration from classic anorak, this item has been re-designed for a more casual look and fashion purpose. The beauty of this piece is the balance of classic construction and modern updates from ZANTER JAPAN. This anorak comes in a large, loose cut, to fit over your warmer layers, such as a fleece or sweatshirt, and allow a full range of motion. This parka is new original creations by ZANTER JAPAN.
Gender : Men.
Fit : This anorak comes in a large, loose cut, to fit over your warmer layers, such as a fleece or sweatshirt, and allow a full range of motion. This product is originally intended to wear as a Oversized Loose Fit (Plenty of room through the chest and arms holes) allow for heavy layers underneath this parka. Fits may vary by style or personal preference.
Our model wears a tagged size M and is 175cm/5'9″tall, 59kg/130lbs and 91cm/36" chest.
・Tagged size M Would be a good fit for Your Chest Measurement : 35-38"(88cm-96cm).
・Tagged size L Would be a good fit for Your Chest Measurement : 38-41"(96cm-104cm).
The following provides approximate garment measurements. (Not body measurements) Please compare actual garment measurements of our product to another you may own.
Width is half chest. Lay the clothing flat and measure 3 cm under the armhole. Measure from side to side.
Made in Japan. Brand-new, new condition with tags. *All measurements are taken with the garment flat on the ground. *Sleeve length is taken from the center back of the neck. *Please understand that measurements may vary somewhat. *Note that actual color may be slightly different from one in the photo. Fabric : Made of 100% cotton water-repellent ventile unlined single ply shell which is a lightweight, breathable, wind resistant fabric technology. It is high density and extremely durable. It combines the toughness and the natural softness for comfort.
Lining and Interlining (Type of insulation ) : Unlined, No fill, No inside padding, This lightweight outerwear piece can be worn for mid-season or even in the winter with under heavy layering.
Closure : Pullover with 1/4 zip. Quarter main zipper closure with 3 snap button storm flap. Whistle pull tab on zipper designed for easy functioning with gloves. The zipper runs up to the collar to provide added protection to the neck from the cold.
Hood type : The hood has a drawstring with cord locks for easy adjustment to cover more of your face. A hood is lined with polyester for durability.
Storage : Large capacity centered zipper pocket with flap cover for a bit of extra protection on the front. Concealed zipper is 2-way zippers : A zipper with two zipper pulls so that it can be unzipped from either direction. And handwarmer pockets accessed via the both side located behind centered zipper pocket. *Note : The handwarmer pocket has wide openings on either side for easy insertion of hands, therefore through which belongings may fall out of.
Cuff : Adjustable velcro tab cuffs to protect from the cold wind.
Style : Mens Casual Fashion.
Sleeve Style : Drop sleeves. The seam of the sleeves extend further down the arms than set-in sleeves. Drop sleeves let you move with ease.
Sleeve Length : Long Sleeves.
Other details : Brand label on front-left-side hem. Drawstring cords with cord lock at parka inside hem to adjust the fit and to seal out the wind. ZANTER JAPAN is the Japanese manufacturer that specializes in downwear and has been researching and developing down jackets. ZANTER was established in 1951 as a clothing department of the current Toyo Feather Industry, Co., Ltd., and is a manufacturer that has been supporting Japanese adventurers, including the Japanese Alpine Club for the world’s first ascent of Manaslu that captured the hearts of the whole of Japan, the Japanese Antarctic Research Expedition, those on Everest expeditions, and the first Japanese to reach the North Pole.
It would not be an exaggeration to say that ZANTER’s history is the history of Japanese downwear. In particular, ZANTER has repeatedly revolutionized its techniques almost every year in developing products for and supplying them to the Japanese Antarctic Research Expedition that has been operating since 1956.
Garment measurements ( Not body measurements ) How to measure the clothing
Body Width (Half Chest) Lay the clothing flat and measure 3 cm under the armhole. Measure from side to side (Considering the thickness of clothing, Measure from inside the material on each instead of external measurements)
Body Length Lay the clothing flat and measure from base of collar seam (excluding collar) down to the end of the hem
Sleeve Length Lay the clothing flat and measure from center back of base of collar seam to the end of the cuff
Shoulder Width Lay the clothing flat and measure shoulder seam to shoulder seam
Lay Jeans/Pants flat, face up and do not stretch or pull fabric.
Waist Measure flat across the back waistband from one side to the other with the natural dip. Double the number to get actual waist size.
Inseam Measure from the crotch seam to the bottom of the leg on the inside seam.
If you are unsure of the size to order, we will assist you. Please contact us by e-mail ( firstname.lastname@example.org ) with the following information : Height, waist circumference measure, chest circumference measure, body weight, (and type of clothing to be worn beneath the jacket most of the time), as well as the type of fit you prefer : Trim, roomy or oversized.