TOYS McCOY Men's Snoopy Trucker-Style Baseball Cap with Side Mesh Panels and Snapback Adjustment, Made in Japan (TMA2623, 031 Black/Off-White)
Sonderpreis
¥19,800 JPY
Free Shipping Worldwide
TOYS McCOY Men's Snoopy Trucker-Style Baseball Cap with Side Mesh Panels and Snapback Adjustment, Made in Japan (TMA2623, 031 Black/Off-White)
TOYS McCOY
This men's Snoopy mesh cap is made in Japan by TOYS McCOY as a custom version of the brand's original mesh-cap design. Its baseball-cap silhouette combines a polyurethane foam front panel, nylon mesh side panels, and cotton twill rear panels, together with a rear snapback adjuster. The design pairs the rounded shape of a baseball cap with side-mesh ventilation and Snoopy artwork, including an embroidered front patch depicting Snoopy holding a guitar against a Union Jack background. Combining trucker-cap-inspired styling, bold visual appeal, and practical everyday wearability, the cap offers a distinctive yet versatile addition to a contemporary casual wardrobe.
Size and Fit Guide:
Gender: Men.
The cap is offered in one adjustable size. A plastic snapback adjuster at the rear allows the head opening to be adjusted in fixed increments within the approximate range listed below.
The cap has a slightly deeper fit and a slightly taller crown. The front rises above the forehead, while the side-mesh panels and cotton-twill rear panels curve gradually toward the top to form a rounded dome. The front has moderate fullness supported by the soft, springy foam, and the supple side and rear panels conform to the head to create a rounded, three-dimensional silhouette.
Fit varies depending on head shape, the adjustment setting, and personal preference. Please use the head-circumference range and visor measurement below as your primary sizing references, and compare them with your own head circumference and a similar cap you already wear. The depth of a familiar cap can also help you assess your preferred fit. The stated head-circumference range is an approximate wearing guide and does not guarantee fit.
The head-circumference range indicates the approximate wearing size accommodated by the adjuster. The visor length is a measurement of the cap itself.
In inches
Tagged Size ONE SIZE
Approximate Head Circumference Range: 22.8"-24.0"
Visor Length: Approximately 2.8"
In centimeters
Tagged Size ONE SIZE
Approximate Head Circumference Range: 58-61cm
Visor Length: Approximately 7cm
Visor Length: Measured in a straight line from the midpoint of the seam joining the visor to the front panel to the outer tip of the visor.
Head Circumference Range: The approximate wearing-size range provided by the rear snapback adjustment. Actual fit varies with head shape, the adjustment setting, and personal preference.
Made in Japan.
- Brand new, in unused condition.
- Slight measurement differences may occur between individual caps and depending on the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
Five-Panel Crown with a Fabric-Covered Top Button
The crown is assembled from five panels: one wide front panel, one nylon mesh panel on each side, and two cotton-twill panels at the rear. Each panel is cut to narrow gradually from the lower edge toward the top. Sewing the adjacent panel edges together shapes the flat materials into a three-dimensional dome that follows the head.
The five panel joins converge radially at a single point at the top of the crown. A fabric-covered top button finishes this central meeting point.
Polyurethane Foam Front Panel with Partial Upper Shaping
The front panel is made from polyurethane foam with a soft, sponge-like feel and springy resilience. The foam supports the fullness of the front while allowing it to remain flexible.
A vertical, dart-like shaping feature extends downward from the upper center of the front panel and ends partway down the front. This shaping takes up material in the upper portion, allowing the single wide panel to curve gently from side to side and round naturally toward the top of the crown.
Because the shaping line stops above the lower edge, the lower front remains a continuous surface without a full-length center join through the area where the embroidered patch is attached.
Nylon Side-Mesh Panels
Nylon mesh panels are positioned on both sides of the crown to provide ventilation. The mesh has enough body to retain its form while remaining supple and flexible, allowing it to follow the sides of the head as it connects the front panel to the rear panels.
Mesh is used only at the sides. The rear retains a solid cotton-twill fabric surface, combining the baseball-cap shape with the ventilation provided by the side panels.
Two Cotton-Twill Rear Panels
The back of the crown consists of two cotton-twill panels. The fabric shows the diagonal ridges characteristic of a twill weave and combines moderate body with suppleness.
A vertical center-back seam joins the two panels. Their shaped construction forms a rounded rear section that follows the back of the head.
Cotton-Twill Visor with Four Rows of Stitching
Cotton twill is also used for the visor. The visor is relatively flat overall with a slight curve. It has sufficient firmness to hold its shape while retaining enough flexibility for a gentle curve to be added gradually by hand.
Four rows of stitching follow the rounded outer contour of the visor. Four corresponding rows are visible on the underside, securing the upper and lower sides together and helping stabilize the visor's shape.
Rear Opening and Plastic Snapback Adjuster
An adjustment opening is formed at the lower rear of the crown, with rounded upper corners. A plastic snapback adjuster is attached at the two sides of this opening.
Raised pegs on one strap fit into the holes on the other. Changing the overlap between the straps adjusts the circumference of the head opening in fixed increments.
Unlined Crown Interior
The crown does not have a full lining. The mesh openings and the reverse surfaces of the individual panels remain visible from the inside. Leaving the side mesh uncovered by a separate lining preserves the ventilation through these panels.
Three Interior Seam-Covering Tapes over Five Panel Joins
The five interior seams joining the crown panels are covered by three separate lengths of tape. Two of these tapes each run continuously from the lower edge on one side of the crown, over the top, and down to the lower edge on the opposite side. Each of these two continuous tapes covers a pair of panel joins.
The third tape extends from the upper edge of the rear adjustment opening to the top of the crown, covering the center-back seam between the two rear panels. The three tapes meet and overlap at the top, forming five radiating sections that extend downward along the five panel joins.
The tapes cover the seam allowances and cut edges, limiting exposed edges and lifting seam allowances while finishing the joins between the different crown materials. They also reduce direct contact between the panel seam allowances and the head.
Tape-Securing Stitches and Parallel Exterior Topstitching
Each interior tape is secured by one row of stitching along each long edge, giving each tape two lengthwise rows. These stitches hold the tape over the seam allowances, help prevent shifting or lifting, and stabilize the panel joins.
The securing stitches also pass through the crown panels. On the outside, they appear as parallel rows of topstitching positioned on either side of each panel join. The same stitching secures the interior seam finish and outlines the five-panel construction on the exterior.
Cloth Inner Band around the Head Opening
A cloth inner band follows the lower inside edge of the crown, except at the rear adjustment opening. It forms the sweatband area in contact with the forehead and sides of the head, limiting direct contact with the crown material and lower-edge seam allowances.
The band also covers the seam allowances around the crown's lower edge, including the point where the front panel and visor are joined. By supporting the perimeter of the head opening, it helps stabilize the lower edge of the cap.
Snoopy, Union Jack, and Guitar Embroidered Front Patch
An embroidered patch is sewn onto the front panel. The design depicts Snoopy holding a guitar against a Union Jack background. The patch is positioned on the continuous lower front surface beneath the partial upper shaping line.
Direct TOYS McCOY Logo Embroidery on the Visor
The "TOYS McCOY" logo is embroidered directly onto the upper surface of the visor on the wearer's left side.
Four-Line "ALL I CARE ABOUT IS MY MUSIC!" Back Print
The wording "ALL I CARE ABOUT IS MY MUSIC!" is printed across four lines on the cotton-twill rear panels. The print extends across the center-back seam that joins the two panels.
The rear lettering completes the combination of three decorative methods used on this model: a sewn-on embroidered front patch, direct logo embroidery on the visor, and a printed graphic at the back.
TOYS McCOY and PEANUTS Interior Labels
TOYS McCOY and PEANUTS labels are attached inside the cap, identifying the cap's brand and its character-themed customization.
The TOYS McCOY label includes the wording "ONE SIZE FITS ALL," indicating the adjustable snapback design. Please refer to the approximate head-circumference range in the size guide when assessing fit.
031 Black/Off-White Color Layout
The front panel is off-white. The cotton-twill visor, nylon side-mesh panels, and cotton-twill rear panels are black.
Made in Japan
This Japanese-made TOYS McCOY cap combines a five-panel crown, polyurethane foam front, nylon side mesh, cotton-twill rear panels and visor, and an adjustable plastic snapback.
Care Instructions
When shaping the visor, make small, gradual adjustments by hand within its natural flexibility. Forceful bending or creating a sharp crease may place stress on the material.
Important Notes
- Our online inventory is shared with our physical retail store. As a result, changes in store inventory may not always be reflected immediately on the website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- Slight measurement differences may occur between individual caps and depending on the measuring method.
- The approximate 58-61cm head-circumference range is a general wearing guide and does not guarantee fit. Actual fit varies depending on head shape, the adjustment setting, and personal preference.
- Some areas of the embroidery may appear to have skipped stitches or broken threads. These appearances are part of the intended design specifications. Please take this into consideration before ordering.
- Because the rear print extends across the seam between the back panels, ink coverage may be slightly uneven along the sewn area. This variation is part of the intended design specifications and a characteristic of this product.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
TOYS McCOY
This men's Snoopy mesh cap is made in Japan by TOYS McCOY as a custom version of the brand's original mesh-cap design. Its baseball-cap silhouette combines a polyurethane foam front panel, nylon mesh side panels, and cotton twill rear panels, together with a rear snapback adjuster. The design pairs the rounded shape of a baseball cap with side-mesh ventilation and Snoopy artwork, including an embroidered front patch depicting Snoopy holding a guitar against a Union Jack background. Combining trucker-cap-inspired styling, bold visual appeal, and practical everyday wearability, the cap offers a distinctive yet versatile addition to a contemporary casual wardrobe.
Size and Fit Guide:
Gender: Men.
The cap is offered in one adjustable size. A plastic snapback adjuster at the rear allows the head opening to be adjusted in fixed increments within the approximate range listed below.
The cap has a slightly deeper fit and a slightly taller crown. The front rises above the forehead, while the side-mesh panels and cotton-twill rear panels curve gradually toward the top to form a rounded dome. The front has moderate fullness supported by the soft, springy foam, and the supple side and rear panels conform to the head to create a rounded, three-dimensional silhouette.
Fit varies depending on head shape, the adjustment setting, and personal preference. Please use the head-circumference range and visor measurement below as your primary sizing references, and compare them with your own head circumference and a similar cap you already wear. The depth of a familiar cap can also help you assess your preferred fit. The stated head-circumference range is an approximate wearing guide and does not guarantee fit.
The head-circumference range indicates the approximate wearing size accommodated by the adjuster. The visor length is a measurement of the cap itself.
In inches
Tagged Size ONE SIZE
Approximate Head Circumference Range: 22.8"-24.0"
Visor Length: Approximately 2.8"
In centimeters
Tagged Size ONE SIZE
Approximate Head Circumference Range: 58-61cm
Visor Length: Approximately 7cm
Visor Length: Measured in a straight line from the midpoint of the seam joining the visor to the front panel to the outer tip of the visor.
Head Circumference Range: The approximate wearing-size range provided by the rear snapback adjustment. Actual fit varies with head shape, the adjustment setting, and personal preference.
Made in Japan.
- Brand new, in unused condition.
- Slight measurement differences may occur between individual caps and depending on the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
Five-Panel Crown with a Fabric-Covered Top Button
The crown is assembled from five panels: one wide front panel, one nylon mesh panel on each side, and two cotton-twill panels at the rear. Each panel is cut to narrow gradually from the lower edge toward the top. Sewing the adjacent panel edges together shapes the flat materials into a three-dimensional dome that follows the head.
The five panel joins converge radially at a single point at the top of the crown. A fabric-covered top button finishes this central meeting point.
Polyurethane Foam Front Panel with Partial Upper Shaping
The front panel is made from polyurethane foam with a soft, sponge-like feel and springy resilience. The foam supports the fullness of the front while allowing it to remain flexible.
A vertical, dart-like shaping feature extends downward from the upper center of the front panel and ends partway down the front. This shaping takes up material in the upper portion, allowing the single wide panel to curve gently from side to side and round naturally toward the top of the crown.
Because the shaping line stops above the lower edge, the lower front remains a continuous surface without a full-length center join through the area where the embroidered patch is attached.
Nylon Side-Mesh Panels
Nylon mesh panels are positioned on both sides of the crown to provide ventilation. The mesh has enough body to retain its form while remaining supple and flexible, allowing it to follow the sides of the head as it connects the front panel to the rear panels.
Mesh is used only at the sides. The rear retains a solid cotton-twill fabric surface, combining the baseball-cap shape with the ventilation provided by the side panels.
Two Cotton-Twill Rear Panels
The back of the crown consists of two cotton-twill panels. The fabric shows the diagonal ridges characteristic of a twill weave and combines moderate body with suppleness.
A vertical center-back seam joins the two panels. Their shaped construction forms a rounded rear section that follows the back of the head.
Cotton-Twill Visor with Four Rows of Stitching
Cotton twill is also used for the visor. The visor is relatively flat overall with a slight curve. It has sufficient firmness to hold its shape while retaining enough flexibility for a gentle curve to be added gradually by hand.
Four rows of stitching follow the rounded outer contour of the visor. Four corresponding rows are visible on the underside, securing the upper and lower sides together and helping stabilize the visor's shape.
Rear Opening and Plastic Snapback Adjuster
An adjustment opening is formed at the lower rear of the crown, with rounded upper corners. A plastic snapback adjuster is attached at the two sides of this opening.
Raised pegs on one strap fit into the holes on the other. Changing the overlap between the straps adjusts the circumference of the head opening in fixed increments.
Unlined Crown Interior
The crown does not have a full lining. The mesh openings and the reverse surfaces of the individual panels remain visible from the inside. Leaving the side mesh uncovered by a separate lining preserves the ventilation through these panels.
Three Interior Seam-Covering Tapes over Five Panel Joins
The five interior seams joining the crown panels are covered by three separate lengths of tape. Two of these tapes each run continuously from the lower edge on one side of the crown, over the top, and down to the lower edge on the opposite side. Each of these two continuous tapes covers a pair of panel joins.
The third tape extends from the upper edge of the rear adjustment opening to the top of the crown, covering the center-back seam between the two rear panels. The three tapes meet and overlap at the top, forming five radiating sections that extend downward along the five panel joins.
The tapes cover the seam allowances and cut edges, limiting exposed edges and lifting seam allowances while finishing the joins between the different crown materials. They also reduce direct contact between the panel seam allowances and the head.
Tape-Securing Stitches and Parallel Exterior Topstitching
Each interior tape is secured by one row of stitching along each long edge, giving each tape two lengthwise rows. These stitches hold the tape over the seam allowances, help prevent shifting or lifting, and stabilize the panel joins.
The securing stitches also pass through the crown panels. On the outside, they appear as parallel rows of topstitching positioned on either side of each panel join. The same stitching secures the interior seam finish and outlines the five-panel construction on the exterior.
Cloth Inner Band around the Head Opening
A cloth inner band follows the lower inside edge of the crown, except at the rear adjustment opening. It forms the sweatband area in contact with the forehead and sides of the head, limiting direct contact with the crown material and lower-edge seam allowances.
The band also covers the seam allowances around the crown's lower edge, including the point where the front panel and visor are joined. By supporting the perimeter of the head opening, it helps stabilize the lower edge of the cap.
Snoopy, Union Jack, and Guitar Embroidered Front Patch
An embroidered patch is sewn onto the front panel. The design depicts Snoopy holding a guitar against a Union Jack background. The patch is positioned on the continuous lower front surface beneath the partial upper shaping line.
Direct TOYS McCOY Logo Embroidery on the Visor
The "TOYS McCOY" logo is embroidered directly onto the upper surface of the visor on the wearer's left side.
Four-Line "ALL I CARE ABOUT IS MY MUSIC!" Back Print
The wording "ALL I CARE ABOUT IS MY MUSIC!" is printed across four lines on the cotton-twill rear panels. The print extends across the center-back seam that joins the two panels.
The rear lettering completes the combination of three decorative methods used on this model: a sewn-on embroidered front patch, direct logo embroidery on the visor, and a printed graphic at the back.
TOYS McCOY and PEANUTS Interior Labels
TOYS McCOY and PEANUTS labels are attached inside the cap, identifying the cap's brand and its character-themed customization.
The TOYS McCOY label includes the wording "ONE SIZE FITS ALL," indicating the adjustable snapback design. Please refer to the approximate head-circumference range in the size guide when assessing fit.
031 Black/Off-White Color Layout
The front panel is off-white. The cotton-twill visor, nylon side-mesh panels, and cotton-twill rear panels are black.
Made in Japan
This Japanese-made TOYS McCOY cap combines a five-panel crown, polyurethane foam front, nylon side mesh, cotton-twill rear panels and visor, and an adjustable plastic snapback.
Care Instructions
When shaping the visor, make small, gradual adjustments by hand within its natural flexibility. Forceful bending or creating a sharp crease may place stress on the material.
Important Notes
- Our online inventory is shared with our physical retail store. As a result, changes in store inventory may not always be reflected immediately on the website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- Slight measurement differences may occur between individual caps and depending on the measuring method.
- The approximate 58-61cm head-circumference range is a general wearing guide and does not guarantee fit. Actual fit varies depending on head shape, the adjustment setting, and personal preference.
- Some areas of the embroidery may appear to have skipped stitches or broken threads. These appearances are part of the intended design specifications. Please take this into consideration before ordering.
- Because the rear print extends across the seam between the back panels, ink coverage may be slightly uneven along the sewn area. This variation is part of the intended design specifications and a characteristic of this product.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
