Direkt zum Inhalt

TOYS McCOY Men's Type B-10 Flight Jacket, WWII Red-Rib Reproduction, 100% Cotton Twill Shell, Alpaca-Wool Pile Lining and Sheepskin Mouton Collar, Made in Japan (TMJ2635, 161 Olive)

Sonderpreis $863.24 USD

Free Shipping Worldwide

Size
TOYS McCOY Men's Type B-10 Flight Jacket, WWII Red-Rib Reproduction, 100% Cotton Twill Shell, Alpaca-Wool Pile Lining and Sheepskin Mouton Collar, Made in Japan (TMJ2635, 161 Olive)

TOYS McCOY

This men's Type B-10 flight jacket is made in Japan by TOYS McCOY. It reproduces a version of the U.S. Army Air Forces' World War II cloth flight jacket distinguished by the deep red wool knit at the wrists and waist. The olive cotton twill shell is lined through most of the body and sleeves with wool-and-alpaca pile on a cotton backing. A brown sheepskin mouton collar folds down over the neckline, and a chin strap hidden beneath it can hold the collar up around the neck. Button-flap waist pockets, shoulder epaulets, and a printed Army Air Forces emblem on the left sleeve recall the original design. The short body gathers gently above the waistband, giving this everyday jacket the rounded profile of a B-10 with a slightly trimmer fit.

Size and Fit Guide:

Gender: Men.

Fit: This jacket has a slightly trim, contemporary cut with moderate room through the chest. The set-in shoulder seams sit close to the shoulder points, and the body and sleeves carry little excess fabric. The short body blouses slightly above the rib-knit waistband, giving the upper body the rounded shape characteristic of a B-10. The knit cuffs draw the sleeves in at the wrists.

The pile lining takes up some of the space inside the body and sleeves. A thinner jacket with the same exterior chest width may therefore feel roomier. If you plan to wear a thick sweatshirt or sweater underneath, or prefer more room with the zipper closed, you may wish to compare the next size up. Going up a size also changes the shoulder width and sleeve length.

Compared with many US and European brands, this jacket tends to fit slightly smaller. We recommend using the actual garment measurements below as your primary guide when selecting your size.

Approximate Size Guide
Tagged Size 38: Approximately US/EU S
Tagged Size 40: Approximately US/EU M
Tagged Size 42: Approximately US/EU L
Tagged Size 44: Approximately US/EU XL

These comparisons are general fit references. Fit varies with your build, the layers you wear, and how much room you prefer.

To help select your size, please measure a similar lined jacket that fits you well, ideally one of comparable thickness. Compare its chest width, body length, sleeve length from the center back and from the shoulder seam, and shoulder width with the measurements below.

Our model wears Tagged Size 38. He is 175 cm (approximately 5'9") tall, weighs 59 kg (approximately 130 lbs), and has a 91 cm (approximately 36") chest. He normally wears a US/EU size S/36.

The measurements below are the exterior dimensions of the jacket laid flat. Width is measured straight across the chest. It is half-chest width, distinct from the full circumference of the jacket or the wearer's chest measurement.


In inches

Tagged Size 38 (M)
Width: 21.7" / Length: 24.8"
Sleeve: 33.5" (24.4") / Shoulder: 18.1"

Tagged Size 40 (L)
Width: 22.4" / Length: 25.6"
Sleeve: 34.6" (25.2") / Shoulder: 18.9"

Tagged Size 42 (XL)
Width: 23.2" / Length: 26.0"
Sleeve: 35.4" (25.6") / Shoulder: 19.7"

Tagged Size 44 (XXL)
Width: 24.0" / Length: 26.8"
Sleeve: 36.2" (26.0") / Shoulder: 20.5"

Tagged Size 46 (XXXL)
Width: 24.8" / Length: 26.8"
Sleeve: 36.6" (26.4") / Shoulder: 20.9"


In centimeters

Tagged Size 38 (M)
Width: 55cm / Length: 63cm
Sleeve: 85cm (62cm) / Shoulder: 46cm

Tagged Size 40 (L)
Width: 57cm / Length: 65cm
Sleeve: 88cm (64cm) / Shoulder: 48cm

Tagged Size 42 (XL)
Width: 59cm / Length: 66cm
Sleeve: 90cm (65cm) / Shoulder: 50cm

Tagged Size 44 (XXL)
Width: 61cm / Length: 68cm
Sleeve: 92cm (66cm) / Shoulder: 52cm

Tagged Size 46 (XXXL)
Width: 63cm / Length: 68cm
Sleeve: 93cm (67cm) / Shoulder: 53cm


[How We Measure the Actual Garment]

Width (Chest Width): With the jacket laid flat, measure straight across from edge to edge approximately 3 cm (1.2") below the underarms.

Length (Body Length): Measure down the back from the seam where the collar joins the body to the bottom edge of the rib-knit waistband. This includes the waistband and excludes the height of the collar.

Sleeve (Center-Back Sleeve Length): For the first value, measure from the center back of the collar seam, across the shoulder and down the sleeve to the end of the cuff, including the full length of the knit ribbing.

Sleeve in Parentheses (Sleeve Length from Shoulder Seam): Measure from the top of the sleeve seam at the shoulder point to the end of the cuff, including the full length of the knit ribbing.

Shoulder (Shoulder Width): Measure straight across the back from the top of one shoulder seam to the top of the other.

Country of Origin: Made in Japan.
Condition: New.
Slight differences can occur between individual jackets and hand measurements. The olive shell and brown collar may appear lighter or darker depending on the lighting and your display settings.


The Type B-10 in U.S. Army Air Forces Service
The U.S. Army Air Forces adopted the Type B-10 in 1943 as a cloth replacement for the sheepskin B-6 flight jacket for intermediate temperatures. Wartime leather shortages prompted the military to reconsider how flight jackets were cut, sewn, and produced in quantity. Cotton twill lent itself to large-scale production, while a lining of alpaca and wool pile supplied insulation with less weight and bulk than the earlier sheepskin construction.

The B-10 shared several details with the AN6552 and AN-J-3A jackets developed for joint Army and Navy use, including a turn-down mouton collar, two lower patch pockets with flaps, and knit cuffs and waistband. The Type B-15, adopted on April 7, 1944, retained the cloth shell and insulating lining but replaced the B-10's applied patch pockets with slash pockets cut into the fronts. This change is generally understood to have made the pockets easier to reach while wearing a parachute harness.

The Red-Rib B-10
TOYS McCOY reproduces a period B-10 variation recognizable by the red wool knit at the cuffs and waist. The red frames the olive drab cotton body at the sleeve ends and hem, while the brown mouton collar gives the neckline its characteristic depth. The shoulder epaulets and button-flap waist pockets retain the layout of the original cloth flight jacket.

Olive Drab Cotton Twill Shell
The 100% cotton shell has fine, closely spaced diagonal twill lines and a relatively smooth, matte surface. The supple cloth follows the curves of the body and sleeves, forming soft folds that give the olive drab subtle variations in light and shade. With wear, creases develop where the jacket bends and the cotton gradually takes on a more broken-in feel.

Wool and Alpaca Pile Lining
A blend of 50% wool and 50% alpaca forms the pile on a 100% cotton backing. The fibers gather into small tufts, giving the lining an uneven surface with pockets of air between the fibers that help retain warmth. The pile lines most of the body and sleeves. At the front it joins the inner edges of the cotton twill facings that finish the opening and support the zipper. At the hem it reaches the seam where the body meets the red waistband. Smooth olive satin replaces the pile over part of each underarm.

The pile rests directly against the layer worn underneath. Depending on that fabric, you may feel some friction when moving your arms or putting on and taking off the jacket, and loose fibers may cling to your clothing. Sensitivity to the natural wool and alpaca fibers also varies when the lining touches bare skin.

Metal Front Zipper with Leather Pull
The metal zipper pull is stamped with the TALON name and fitted with a knotted cowhide tab. The leather gives gloved fingers a longer grip and can be removed by untying the knot. The cotton twill at each side of the zipper runs to the bottom edge of the jacket, with the ends of the knit waistband sewn into these twill sections. This gives the zipper a stable fabric mounting and leaves the waistband free to stretch around the waist.

Short Interior Wind Flap
A fabric wind flap is sewn inside the lower front on the wearer's right. It runs from the hem to about the height of the tops of the waist pockets and has a rounded upper corner. Visible when the jacket hangs open, the flap lies concealed behind the closed zipper, where the extra layer helps limit drafts through the zipper teeth and front opening over the abdomen.

Brown Sheepskin Mouton Collar
The turn-down collar has rounded points and a dense brown sheepskin mouton face. The direction of the fleece changes how it catches the light, bringing out different shades of brown against the matte olive shell. The sheepskin gives the collar its thickness and rounded profile. Matching olive drab cotton twill supports it from underneath. With the collar folded down, the fleece faces outward. Turning it up brings the fleece against the sides and back of the neck.

Adjustable Chin Strap with Under-Collar Storage
A matching twill chin strap is sewn at one end to the underside of the wearer's left collar. With the collar raised, the buttonhole at the free end fastens to either of two buttons under the right collar. The two positions adjust the opening at the throat, holding the collar points together to help keep out drafts. When the strap is unused, it folds back onto a separate storage button under the left collar and stays hidden when the collar is folded down.

Button-Flap Patch Pockets with a Left Pen Compartment
Each waist pocket is cut from the shell twill with angled lower corners and stitched to the outside of the jacket along the sides and bottom. A flap sewn to the body above the opening lifts from its lower edge. A vertical buttonhole at the center of each flap fits over a button on the pocket face, covering the opening and helping secure the contents.

On the wearer's left, a small opening along the top edge of the flap lines up with a separate pen compartment. A fabric divider sewn inside the pocket keeps the pen apart from the main compartment, so a pen can be slipped into place while the flap stays buttoned.

Snap-Closing Inside Pocket
The inside pocket sits in the facing on the wearer's left, next to the pile lining. Its side-entry opening runs vertically, is edged with a narrow strip of fabric, and closes with a single metal snap near the center. The TOYS McCOY production tag and care label are sewn inside this pocket.

Two-Piece Set-In Sleeves and Stepped Wool Rib-Knit Cuffs
Two cotton twill panels are sewn together to form each sleeve, and the shaped sleeve cap is set into the armhole. A red 100% wool cuff finishes the sleeve end. The knit changes partway along the cuff, with wider ribs where it joins the twill and finer ribs at the wrist. The stretchy knit draws the sleeve in at the wrist, helping it stay in place and limiting drafts at the opening.

Red Wool Rib-Knit Waistband
A band of red 100% wool rib knit follows the lower edge of the body, running from the twill beside the zipper, around the sides and back, to the opposite front edge. The knit draws the short body in at the waist, allowing the cloth above it to blouse slightly into the rounded profile of a B-10. The waistband and cuffs both sit close to the body to help limit air movement through the openings.

Cotton Twill and Satin Underarm Panels
An inset panel of matching cotton twill joins the body and sleeve at each underarm. The separate pieces give shape to the shell where the arm moves. On the inside, the corresponding panel is cut from smooth olive satin with a slight sheen. This gusset-like arrangement appears intended to ease pulling at the underarm as the arms are raised and lowered.

Buttoned Shoulder Epaulets with Reinforced Bases
A narrow epaulet of shell twill follows each shoulder line. Its outer end is sewn down at the shoulder with a rectangle of stitching and crossing diagonals inside it. The pointed inner end buttons near the collar and can be unfastened.

Plain Back without a Center Seam or Back Yoke
The center of the back is an uninterrupted expanse of olive drab twill, free of a vertical center seam or horizontal yoke seam. The natural folds of the cloth are particularly visible across this broad surface.

Printed Army Air Forces Sleeve Insignia
The wing-and-star emblem and the words "ARMY AIR FORCES" are printed directly on the olive drab twill of the wearer's upper left sleeve.

Reproduction Contractor Label and Hanger Loop
A rectangular cloth label is sewn onto the pile lining at the back of the neck. Its layout follows period military contractor labels, with the designations TYPE B-10 and SPECIFICATION NO. 3157, along with size, stock, and order numbers. It also bears the wording "TOYS McCOY MFG. CO." and the property markings "PROPERTY" and "AIR FORCES, U.S. ARMY". The number in the size field corresponds to the tagged size of the individual jacket.

Just above the label, a narrow strip of matching shell twill is sewn down at both ends inside the back neckline to form a loop for hanging the jacket on a hook.

Made in Japan
Made in Japan by TOYS McCOY, this reproduction preserves the insulating pile lining and practical pocket and collar construction of the B-10. The deep red wool knit at the waist and wrists gives this version its distinctive period color combination alongside the olive cotton twill and brown mouton.

Care Instructions
The cotton shell, wool-and-alpaca pile, sheepskin mouton collar, wool rib knit, and leather zipper pull each have different care requirements. Follow the care label on the actual jacket. For advice on cleaning, consult a specialist experienced in garments that combine textiles, fur, and leather.

Do not wash at home.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Do not professionally wet clean.

Storage
Hang the jacket on a broad hanger in a shaded, well-ventilated place. Prolonged exposure to direct sunlight may fade the olive cotton shell. If you store the jacket in a box, choose a dry location off the floor. A moth repellent can help protect the mouton collar, alpaca-and-wool pile lining, and wool rib knit from insect damage. A moisture absorber can help keep the box dry.

Spot Cleaning the Cotton Twill Shell
For localized dirt on the cotton shell, lightly dampen a soft cloth with a mild, pH-neutral detergent diluted in water. Gently wipe the soiled area, feathering the edges into the surrounding fabric to reduce the chance of leaving a visible ring. Then use a clean, lightly dampened cloth to remove any detergent residue.

The care label for this model prohibits washing, tumble drying, and dry cleaning. Washing or tumble drying may distort the shape of the jacket. Dry cleaning may fade the Army Air Forces marking on the left sleeve, alter the texture of the mouton collar and alpaca-and-wool lining, or cause the surface of the cotton twill to become fuzzy.

Brushing the Sheepskin Mouton Collar
Use a soft brush to gently remove dust from the fleece. Light, regular brushing helps preserve the texture and appearance of the mouton collar.

Operating the Front Zipper
Lower the slider all the way until it rests against the retaining box at the bottom of the zipper. Guide the insertion pin through the slider and fully into the box. Once the pin is seated, hold the zipper tape and the adjacent cotton shell steady on the pin side, then gently draw the slider upward.

If the slider resists, lower it and check that the pin is fully seated before trying again. Forcing the slider upward while it is above the box or while the pin is only partially inserted can damage the zipper.

Important Notes
The pile lining and mouton collar can look lighter or darker depending on the direction of the nap. The texture and appearance of these natural fibers can vary from one jacket to another.

- We share inventory across our retail store and online shops. Stock updates may take time to appear on each website.
- If orders overlap, an item may sell out before your order can be filled. We appreciate your understanding.
- We measure each garment by hand with a tape measure while it is laid flat. Individual garments and measuring methods can produce slight differences.
- The actual color may differ slightly from the photographs depending on the lighting and your display settings.

Back to top