Buzz Rickson's Men's B-10 Flight Jacket, Superior Togs Reproduction, 100% Cotton Twill Shell, Alpaca-Wool Pile Lining, Sheepskin Mouton Collar and Red Wool Rib Knit, Made in Japan (BR15924, 01 Olive Drab)
할인 가격
¥117,800 JPY
Free Shipping Worldwide
Product Description in English.
Buzz Rickson's Men's B-10 Flight Jacket, Superior Togs Reproduction, 100% Cotton Twill Shell, Alpaca-Wool Pile Lining, Sheepskin Mouton Collar and Red Wool Rib Knit, Made in Japan (BR15924, 01 Olive Drab)
Buzz Rickson's
This men's Type B-10 flight jacket is made in Japan by Buzz Rickson's, Toyo Enterprises' military label specializing in reproductions and interpretations of vintage American military clothing. Based on the red-rib B-10 produced by Superior Togs Co., Inc., this model recreates a distinctive version of the cloth flight jacket adopted by the U.S. Army Air Forces during World War II. Its construction combines an olive drab 100% cotton twill shell, a 50% wool and 50% alpaca pile lining through the body and sleeves, a brown sheepskin mouton collar, and red 100% wool rib-knit cuffs and waistband. A metal zipper with a TALON-marked pull and cowhide pull tab, a short internal storm flap, an adjustable collar strap, flap-covered patch pockets, and button-fastened shoulder epaulets reproduce the practical details of the original design. The slightly trim regular fit is paired with a relatively short body, moderate fullness supported by the shell and lining, and a ribbed hem that draws the lower edge toward the waist. These proportions and contrasting materials bring the character of the military flight jacket into contemporary casual outerwear, while the thickness of the pile lining should be considered when choosing a size for layering.
Size and Fit Guide:
Gender: Men.
Fit: In terms of how it feels when worn, this jacket falls on the slightly slimmer side of a regular fit, without being overly tight or having the roominess of a relaxed fit. The shoulders are not cut especially wide, and the thick pile lining occupies some of the space inside the garment, contributing to its slightly trim feel. The amount of room available for layering will vary with the thickness of the clothing worn underneath.
In terms of its appearance when worn, this jacket combines a relatively short body length with moderate width through the torso, creating the classic proportions of a flight jacket. The thickness of the lining gives the body and sleeves a gently rounded, substantial appearance. The set-in sleeves establish a defined shoulder line, keeping the shoulder area relatively neat while allowing moderate fullness through the sleeves. At the hem, the rib-knit waistband follows the waist and gathers the body's volume at the lower edge. The rib-knit cuffs similarly settle around the wrists, creating a natural transition from the fuller sleeves to the narrower sleeve openings.
With continued wear, the cotton shell gradually becomes more supple and develops a more naturally broken-in feel.
Our model wears Tagged Size 36. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears size S in U.S. and European brands. On him, this size accommodates a thin inner layer, but a thicker layer such as a sweatshirt makes the fit feel restrictive, particularly with the front zipper closed. Please consider this difference in layering alongside the modeled photographs when comparing sizes.
Approximate Size Guide
Tagged Size 36: Approximately US/EU XS-S.
Tagged Size 38: Approximately US/EU S-M.
Tagged Size 40: Approximately US/EU M-L.
Tagged Size 42: Approximately US/EU L-XL.
Tagged Size 44: Approximately US/EU XL-XXL.
These comparisons are intended only as general fit references, as sizing varies among brands and garments. The letter sizes shown beside the tagged sizes in the measurement listings below are the manufacturer's size designations. Actual fit will depend on your body type, the thickness of the layers worn underneath, and your preferred amount of room.
To help select your size, please measure a similar lined jacket that fits you well, ideally one with comparable thickness and construction, and compare its chest width, body length, center-back sleeve length, sleeve length from the shoulder seam, and shoulder width with the measurements below.
Depending on your build and intended layering, you may wish to compare the next size up as well, particularly if you plan to wear a thick sweatshirt or sweater underneath or prefer additional room with the zipper closed. A larger size also changes the shoulder width and sleeve lengths, so please assess all of the measurements together.
The listed measurements are taken with the jacket laid flat and reflect its exterior dimensions. They describe the garment itself, not the wearer's body. Width is the straight-across chest measurement and does not represent the jacket's full chest circumference or the wearer's chest measurement. Because the pile lining takes up space inside, this jacket may provide less usable room than a thinner jacket with the same listed chest width. Please consider this difference when comparing measurements and choosing your size.
In inches
Tagged Size 36
Width: 21.3" / Length: 24.4"
Sleeve: 32.7" (24.0") / Shoulder: 17.3"
Tagged Size 38
Width: 22.4" / Length: 24.8"
Sleeve: 33.9" (24.8") / Shoulder: 18.1"
Tagged Size 40
Width: 23.2" / Length: 24.8"
Sleeve: 35.0" (25.6") / Shoulder: 18.9"
Tagged Size 42
Width: 24.0" / Length: 26.0"
Sleeve: 35.8" (26.0") / Shoulder: 19.7"
Tagged Size 44
Width: 24.8" / Length: 26.0"
Sleeve: 37.0" (26.8") / Shoulder: 20.5"
In centimeters
Tagged Size 36
Width: 54cm / Length: 62cm
Sleeve: 83cm (61cm) / Shoulder: 44cm
Tagged Size 38
Width: 57cm / Length: 63cm
Sleeve: 86cm (63cm) / Shoulder: 46cm
Tagged Size 40
Width: 59cm / Length: 63cm
Sleeve: 89cm (65cm) / Shoulder: 48cm
Tagged Size 42
Width: 61cm / Length: 66cm
Sleeve: 91cm (66cm) / Shoulder: 50cm
Tagged Size 44
Width: 63cm / Length: 66cm
Sleeve: 94cm (68cm) / Shoulder: 52cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Measured with the jacket laid flat, straight across from side to side approximately 3cm (about 1.2 in.) below the underarms. This is a flat width measurement, not the jacket's full chest circumference or the wearer's chest measurement.
Length (Body Length): Measured down the back from the base of the collar, at the seam where the collar joins the body, to the bottom edge of the rib-knit waistband. The waistband is included, but the height of the collar is not.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff. The full length of the rib-knit cuff is included.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The measurement in parentheses is taken from the shoulder seam where the sleeve joins the body down to the end of the cuff. The full length of the rib-knit cuff is included.
Shoulder (Shoulder Width): Measured straight across the back from one shoulder seam to the other.
Made in Japan.
- Brand new and unused.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Slight measurement differences may occur due to individual garment variations and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
Type B-10: The Transition to Cloth Flight Jackets
The Type B-10 was officially adopted by the U.S. Army Air Forces on July 22, 1943, as an intermediate-temperature flight jacket to replace the earlier B-6. Introduced during the transition from leather to cloth flying clothing, it combined a cotton twill shell with an insulating pile lining.
The acute shortage of leather during World War II was an important part of this development. The U.S. military reconsidered not only the materials used in flight jackets but also their sewing methods and suitability for large-scale production. Cotton twill was selected for the outer shell as a material suited to mass production, allowing a protective flight jacket to be manufactured from cloth while retaining the insulation required for cold conditions.
Raised-pile materials incorporating alpaca and wool were used for the lining. Compared with earlier sheepskin jackets, this arrangement reduced bulk and weight while retaining warmth. The combination of a cotton twill shell and pile lining brought together the practical handling of a cloth jacket and the insulation required of flying clothing.
The B-10 also shares visual and structural features with the AN series, including the AN6552 and AN-J-3A, which were developed with joint Army and Navy use in mind. These features include a fold-down mouton collar, flap-covered patch pockets on the lower front, and knit cuffs and waistband. The B-10 combined this general arrangement with a cloth shell and pile lining for its role as an intermediate-temperature Army Air Forces flight jacket.
On April 7, 1944, the Type B-15 was adopted as a development of the B-10. The externally attached flap-covered patch pockets of the B-10 were replaced by slash pockets set into the body of the B-15. This change is understood to have made the pockets easier to access while wearing a parachute harness. The combination of a cloth shell and insulating lining continued, with further changes addressing movement and compatibility with flying equipment.
Superior Togs Co., Inc. Red Rib Reproduction
This model reproduces the B-10 red-rib version manufactured by Superior Togs Co., Inc., a contractor that also produced flight jackets including the B-15, B-15A, and L-2A. The combination of an olive drab body with red cuffs and waistband gives this version its distinctive appearance.
Buzz Rickson's recreates this configuration with olive drab cotton twill, alpaca-wool pile lining, and a brown sheepskin mouton collar. The dimensional fur collar, flap-covered waist pockets, shoulder epaulets, and contrasting red knit trim reproduce the characteristic appearance of the Superior Togs B-10 while retaining the practical construction of an insulated flight jacket.
100% Cotton Twill Shell
The shell is made from 100% cotton twill. Its closely woven, relatively smooth surface shows fine diagonal twill lines and a restrained sheen. The fabric combines moderate body with suppleness, allowing it to follow the rounded contours of the jacket rather than forming a completely rigid outer layer.
Across the body and sleeves, the cloth bends into gentle folds and natural undulations that contribute to the dimensional appearance of a cloth flight jacket. The olive drab color shifts between lighter and darker tones as surfaces turn toward or away from the light, creating soft shading along folds and creases. With continued wear, the cotton develops creases and a more settled feel in response to the wearer's movement, gradually changing its surface character.
50% Wool and 50% Alpaca Pile Lining
The body and sleeves are lined with a pile fabric composed of 50% wool and 50% alpaca. The raised fibers gather into small tufts, giving the lining an uneven, textured surface. Air held between these fibers forms an insulating layer that helps limit heat loss from inside the jacket.
Along the inside of the front opening, facings made from the same cotton twill as the shell finish and support the front edges. These fabric sections also support the zipper attachment. The pile lining is sewn to the body-side edges of the facings, joining the stable woven material at the opening to the insulating pile used through the rest of the interior.
The pile extends inward from the front facings and upward from the top of the rib-knit waistband, continuing through the body and sleeves. Separate fabric sections are used at the underarms. The interior therefore combines pile lining with front facings, the internal front flap, the waistband, and the underarm inserts according to the construction requirements of each area.
Because the raised pile is exposed inside the jacket, it comes into direct contact with the clothing worn underneath. Depending on the fabric of your inner layer, you may notice friction when putting the jacket on, taking it off, or moving, and some fibers may transfer to that layer. The sensation of natural animal fibers against the skin, including any prickly feeling, also varies from person to person.
Metal Front Zipper with a TALON-Marked Pull and Cowhide Tab
The front closes with a metal zipper. Its pull is marked "TALON" and fitted with a tied cowhide leather tab. Extending the gripping area helps make the zipper easier to operate while wearing gloves. The leather tab can also be removed by untying its knot.
The cotton twill sections along the front opening continue down to the hem, with the rib-knit waistband attached on either side. This arrangement gives the zipper a woven-fabric foundation while allowing the surrounding waistband to stretch around the waist.
Short Internal Storm Flap at the Lower Front
A fabric storm flap is attached behind the zipper on the lower portion of the wearer's right front panel. It runs upward from the hem to approximately the area near the top of the waist pockets, rather than extending all the way to the collar. The upper corner is rounded.
With the zipper closed, this additional layer lies behind the front opening from the lower abdomen to the hem. It helps reduce wind entering through the spaces between the metal zipper teeth and along the front opening, supplementing protection at the lower front of the jacket.
Brown Sheepskin Mouton Collar
The fold-down collar is made from sheepskin mouton, with dense brown fur and rounded collar points. Its color and texture contrast with the olive drab cotton shell, defining the neckline through the difference between woven cloth and fur.
The fur changes in apparent lightness and darkness according to the direction of the nap, the lighting, and the viewing angle. This sheepskin material differs from the alpaca-wool pile used in the lining and gives the collar its own thickness and three-dimensional form.
Cotton Twill Undercollar and Adjustable Chin Strap
The underside of the collar is made from the same olive drab cotton twill as the shell, forming a fabric backing that supports the mouton. When the collar is folded down, the fur faces outward. When raised, the fur turns toward the neck and covers the sides and back, allowing the coverage around the neckline to change with the position of the collar.
A matching cotton twill chin strap is attached to the wearer's left undercollar, on the fabric surface concealed beneath the collar when it is folded down. One end of the strap is sewn in place, while the other has a buttonhole. Two fastening buttons are positioned on the underside of the wearer's right collar.
With the collar raised, the strap can be brought across the throat and secured to either of these two buttons to adjust the opening. Connecting the two sides helps hold the front of the raised collar together and limits the separation of the collar points, supplementing wind protection around the neck.
When the strap is not in use, it folds back beneath the left collar and fastens to a separate storage button. Folding the collar down conceals the strap beneath it. The right-side buttons are therefore used to secure the raised collar, while the left-side button holds the strap in its stored position.
Flap-Covered Front Patch Pockets
Two patch pockets are positioned at the waist on the front of the jacket. Each pocket is made from matching shell fabric sewn onto the outside of the body, with the space between the applied panel and the jacket forming the pocket compartment. The lower corners are cut at an angle, and stitching secures the sides and bottom while leaving the top open for access.
A flap is sewn to the body above each pocket along its upper edge and lifts from below. A vertical buttonhole at the center of the flap fastens over a button on the pocket panel. Covering the opening in this way helps keep the contents from slipping out unintentionally.
The upper corners of the pocket panels and flaps are reinforced with short combinations of stitching. These stitches support the areas that receive repeated strain when the flaps are opened and closed or when objects are placed into and removed from the pockets.
Pen Opening and Internal Divider in the Left Waist Pocket
The wearer's left waist pocket has a pen opening incorporated into part of the flap's upper edge. A fabric divider is sewn inside the pocket to separate the pen compartment from the main storage area.
This arrangement allows a pen to be inserted through the upper opening while the flap remains buttoned closed. The dedicated internal section keeps the pen compartment distinct from the rest of the pocket.
Snap-Fastened Interior Pocket
One interior pocket is positioned inside the wearer's left front panel. Its vertically oriented opening is accessed from the side and sits in the front facing next to the pile lining. Narrow fabric strips finish the edges around the opening.
A single metal snap near the middle secures the opening, providing storage inside the body in addition to the two exterior waist pockets. The brand label and fabric-content label are attached inside this pocket.
Set-In Sleeves with Two-Piece Shell Construction
The sleeves use a set-in construction, with each sleeve cap sewn into the corresponding armhole of the body. Each outer sleeve is formed from two fabric panels sewn together into a tubular shape, with a separate rib-knit cuff attached at the end.
This construction establishes defined shoulder and armhole seams while allowing the sleeve fabric to retain the rounded volume created by the shell and lining.
Red 100% Wool Cuffs with a Stepped Rib Structure
The cuffs are knitted from 100% wool in the distinctive red color of this version. The rib structure changes partway along each cuff: the section nearest the sleeve has broader ribs, while the section that settles around the wrist uses finer ribs.
The elastic knit follows the wrist with moderate tension, helping reduce wind entry at the sleeve openings. It also draws the sleeve ends inward and helps keep them in position, creating a natural narrowing from the fuller cloth sleeve to the wrist.
Red 100% Wool Rib-Knit Waistband
The lower body is finished with a band of red 100% wool rib knit matching the cuffs. It is sewn along the bottom of the body and runs from the front panels around the sides and across the back. At the front opening, its ends join the cotton twill sections alongside the zipper.
The transition from woven cotton to elastic knit allows the hem to follow the waist. As the waistband settles toward the body, it gathers the jacket's volume at the lower edge. Together with the relatively short body length, this creates the waist-length outline associated with the B-10.
The waistband and cuffs also help bring the jacket's openings closer to the body, reducing the movement of air through those openings.
Underarm Insert Panels
Separate panels connect the body and sleeves at the underarms. The use of multiple fabric sections shapes this area in three dimensions and provides for movement at the base of the arms.
Gusset-like inserts appear on the outside, with separate underarm sections also incorporated into the interior. These transitions are positioned to follow the shape of the underarm area.
Button-Fastened Shoulder Epaulets
Both shoulders are fitted with epaulets made from the same cotton twill as the shell. Each is a narrow, elongated tab following the shoulder line, with a pointed end nearest the collar.
The outer end is sewn to the body near the shoulder edge, and the inner pointed end fastens with a button near the collar. This allows the collar-side end to be opened and closed. At the sewn outer attachment, a rectangular outline of stitching with crossing stitches inside reinforces the connection.
Uninterrupted Central Back Panel
The back has no center-back joining seam or horizontal back yoke. This leaves a broad, uninterrupted area of cotton twill through the center of the back.
Army Air Forces Prints on the Left Sleeve and Interior Flap
The wearer's left upper sleeve is printed directly on the fabric with the wing-and-star emblem and the words "ARMY AIR FORCES." This color print reproduces the exterior service marking.
A second wing-and-star emblem with the same wording is printed in a single white color on the matching-fabric flap inside the wearer's right front panel. Positioned where it can be seen when the jacket is open, this interior marking is separate from the color print on the left sleeve. Both the exterior emblem and the white interior print are reproduced as part of the jacket's detailing.
Superior Togs Co., Inc. Reproduction Contractor Label
A reproduction Superior Togs Co., Inc. contractor label is sewn to the pile lining at the inside back neck. The rectangular label reproduces the arrangement of garment identification and contract information found on period labels.
Its text includes "TYPE B-10," "SPECIFICATION NO. 3157," the size, stock number, order number, manufacturer name, "PROPERTY," and "AIR FORCES, U.S. ARMY." The number in the size field corresponds to the tagged size of the individual jacket.
Matching Cotton Twill Hanger Loop
A hanger loop is positioned inside the back neckline above the reproduction contractor label. It is made from a narrow strip of matching shell fabric formed into a band, with both ends sewn in place to create a loop.
Made in Japan
This Japanese-made reproduction brings together the material character and construction details of the Superior Togs B-10 red-rib version. The cotton twill shell, insulating alpaca-wool pile, mouton collar, practical pockets, and adjustable collar strap retain the jacket's roots in protective flying clothing.
The olive drab body, brown fur collar, and red wool knit create the distinctive contrast of this version. Its relatively short body, rounded volume, and ribbed waist give the finished jacket a classic, rugged appearance consistent with its military flight-jacket design.
Buzz Rickson's by Toyo Enterprise Lot No. BR15924 / Type B-10 RED RIB VERSION "SUPERIOR TOGS CO., INC."
Care Instructions
Do not wash at home.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Do not professionally wet clean.
Consult a specialist regarding cleaning.
This jacket combines materials with different care requirements, including a cotton shell, alpaca-wool pile lining, sheepskin collar, wool knit trim, and a leather zipper-pull tab. Please consult a specialist experienced in garments that combine fur, leather, and textiles, and make sure the specialist checks the attached care label before advising on any treatment.
The pile lining and fur collar may show lighter and darker areas depending on the direction of the nap. Because natural materials are used, the fur and pile can also vary in texture and appearance between individual jackets.
Always follow the care instructions attached to the actual product.
Care Instructions for the Buzz Rickson's B-10 Flight Jacket
Washing the entire jacket, tumble drying, and dry cleaning are not recommended.
To faithfully reproduce the original flight jacket, this model combines a cotton shell with a sheepskin collar, an alpaca-and-wool pile lining, wool-knit cuffs and waistband, and a leather zipper pull tab. Exposure to water or heat may cause these materials to shrink or become misshapen, affecting the jacket's overall shape, fit, and appearance.
Dry cleaning may also cause the Army Air Forces markings to fade or disappear completely. Please keep this in mind when considering any cleaning treatment.
For areas that become noticeably soiled, gently wipe the affected area with a cloth dampened with a solution of pH-neutral detergent diluted in water. Always test this method on an inconspicuous area first, as localized cleaning may cause uneven coloration.
Do not deliberately soil, distress, or artificially age the jacket, as doing so may damage its materials and construction.
Storage
Store the jacket on a wide hanger to help maintain its shape. Choose a dry, well-ventilated location, and protect it from dust with a clean, dry towel or a similar breathable covering.
Suitable moth protection and moisture absorbers may help protect the jacket during storage. Periodically check for mold and insect damage, particularly in the wool-knit components.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, a garment may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken manually with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
Buzz Rickson's Men's B-10 Flight Jacket, Superior Togs Reproduction, 100% Cotton Twill Shell, Alpaca-Wool Pile Lining, Sheepskin Mouton Collar and Red Wool Rib Knit, Made in Japan (BR15924, 01 Olive Drab)
Buzz Rickson's
This men's Type B-10 flight jacket is made in Japan by Buzz Rickson's, Toyo Enterprises' military label specializing in reproductions and interpretations of vintage American military clothing. Based on the red-rib B-10 produced by Superior Togs Co., Inc., this model recreates a distinctive version of the cloth flight jacket adopted by the U.S. Army Air Forces during World War II. Its construction combines an olive drab 100% cotton twill shell, a 50% wool and 50% alpaca pile lining through the body and sleeves, a brown sheepskin mouton collar, and red 100% wool rib-knit cuffs and waistband. A metal zipper with a TALON-marked pull and cowhide pull tab, a short internal storm flap, an adjustable collar strap, flap-covered patch pockets, and button-fastened shoulder epaulets reproduce the practical details of the original design. The slightly trim regular fit is paired with a relatively short body, moderate fullness supported by the shell and lining, and a ribbed hem that draws the lower edge toward the waist. These proportions and contrasting materials bring the character of the military flight jacket into contemporary casual outerwear, while the thickness of the pile lining should be considered when choosing a size for layering.
Size and Fit Guide:
Gender: Men.
Fit: In terms of how it feels when worn, this jacket falls on the slightly slimmer side of a regular fit, without being overly tight or having the roominess of a relaxed fit. The shoulders are not cut especially wide, and the thick pile lining occupies some of the space inside the garment, contributing to its slightly trim feel. The amount of room available for layering will vary with the thickness of the clothing worn underneath.
In terms of its appearance when worn, this jacket combines a relatively short body length with moderate width through the torso, creating the classic proportions of a flight jacket. The thickness of the lining gives the body and sleeves a gently rounded, substantial appearance. The set-in sleeves establish a defined shoulder line, keeping the shoulder area relatively neat while allowing moderate fullness through the sleeves. At the hem, the rib-knit waistband follows the waist and gathers the body's volume at the lower edge. The rib-knit cuffs similarly settle around the wrists, creating a natural transition from the fuller sleeves to the narrower sleeve openings.
With continued wear, the cotton shell gradually becomes more supple and develops a more naturally broken-in feel.
Our model wears Tagged Size 36. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears size S in U.S. and European brands. On him, this size accommodates a thin inner layer, but a thicker layer such as a sweatshirt makes the fit feel restrictive, particularly with the front zipper closed. Please consider this difference in layering alongside the modeled photographs when comparing sizes.
Approximate Size Guide
Tagged Size 36: Approximately US/EU XS-S.
Tagged Size 38: Approximately US/EU S-M.
Tagged Size 40: Approximately US/EU M-L.
Tagged Size 42: Approximately US/EU L-XL.
Tagged Size 44: Approximately US/EU XL-XXL.
These comparisons are intended only as general fit references, as sizing varies among brands and garments. The letter sizes shown beside the tagged sizes in the measurement listings below are the manufacturer's size designations. Actual fit will depend on your body type, the thickness of the layers worn underneath, and your preferred amount of room.
To help select your size, please measure a similar lined jacket that fits you well, ideally one with comparable thickness and construction, and compare its chest width, body length, center-back sleeve length, sleeve length from the shoulder seam, and shoulder width with the measurements below.
Depending on your build and intended layering, you may wish to compare the next size up as well, particularly if you plan to wear a thick sweatshirt or sweater underneath or prefer additional room with the zipper closed. A larger size also changes the shoulder width and sleeve lengths, so please assess all of the measurements together.
The listed measurements are taken with the jacket laid flat and reflect its exterior dimensions. They describe the garment itself, not the wearer's body. Width is the straight-across chest measurement and does not represent the jacket's full chest circumference or the wearer's chest measurement. Because the pile lining takes up space inside, this jacket may provide less usable room than a thinner jacket with the same listed chest width. Please consider this difference when comparing measurements and choosing your size.
In inches
Tagged Size 36
Width: 21.3" / Length: 24.4"
Sleeve: 32.7" (24.0") / Shoulder: 17.3"
Tagged Size 38
Width: 22.4" / Length: 24.8"
Sleeve: 33.9" (24.8") / Shoulder: 18.1"
Tagged Size 40
Width: 23.2" / Length: 24.8"
Sleeve: 35.0" (25.6") / Shoulder: 18.9"
Tagged Size 42
Width: 24.0" / Length: 26.0"
Sleeve: 35.8" (26.0") / Shoulder: 19.7"
Tagged Size 44
Width: 24.8" / Length: 26.0"
Sleeve: 37.0" (26.8") / Shoulder: 20.5"
In centimeters
Tagged Size 36
Width: 54cm / Length: 62cm
Sleeve: 83cm (61cm) / Shoulder: 44cm
Tagged Size 38
Width: 57cm / Length: 63cm
Sleeve: 86cm (63cm) / Shoulder: 46cm
Tagged Size 40
Width: 59cm / Length: 63cm
Sleeve: 89cm (65cm) / Shoulder: 48cm
Tagged Size 42
Width: 61cm / Length: 66cm
Sleeve: 91cm (66cm) / Shoulder: 50cm
Tagged Size 44
Width: 63cm / Length: 66cm
Sleeve: 94cm (68cm) / Shoulder: 52cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Measured with the jacket laid flat, straight across from side to side approximately 3cm (about 1.2 in.) below the underarms. This is a flat width measurement, not the jacket's full chest circumference or the wearer's chest measurement.
Length (Body Length): Measured down the back from the base of the collar, at the seam where the collar joins the body, to the bottom edge of the rib-knit waistband. The waistband is included, but the height of the collar is not.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff. The full length of the rib-knit cuff is included.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The measurement in parentheses is taken from the shoulder seam where the sleeve joins the body down to the end of the cuff. The full length of the rib-knit cuff is included.
Shoulder (Shoulder Width): Measured straight across the back from one shoulder seam to the other.
Made in Japan.
- Brand new and unused.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Slight measurement differences may occur due to individual garment variations and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
Type B-10: The Transition to Cloth Flight Jackets
The Type B-10 was officially adopted by the U.S. Army Air Forces on July 22, 1943, as an intermediate-temperature flight jacket to replace the earlier B-6. Introduced during the transition from leather to cloth flying clothing, it combined a cotton twill shell with an insulating pile lining.
The acute shortage of leather during World War II was an important part of this development. The U.S. military reconsidered not only the materials used in flight jackets but also their sewing methods and suitability for large-scale production. Cotton twill was selected for the outer shell as a material suited to mass production, allowing a protective flight jacket to be manufactured from cloth while retaining the insulation required for cold conditions.
Raised-pile materials incorporating alpaca and wool were used for the lining. Compared with earlier sheepskin jackets, this arrangement reduced bulk and weight while retaining warmth. The combination of a cotton twill shell and pile lining brought together the practical handling of a cloth jacket and the insulation required of flying clothing.
The B-10 also shares visual and structural features with the AN series, including the AN6552 and AN-J-3A, which were developed with joint Army and Navy use in mind. These features include a fold-down mouton collar, flap-covered patch pockets on the lower front, and knit cuffs and waistband. The B-10 combined this general arrangement with a cloth shell and pile lining for its role as an intermediate-temperature Army Air Forces flight jacket.
On April 7, 1944, the Type B-15 was adopted as a development of the B-10. The externally attached flap-covered patch pockets of the B-10 were replaced by slash pockets set into the body of the B-15. This change is understood to have made the pockets easier to access while wearing a parachute harness. The combination of a cloth shell and insulating lining continued, with further changes addressing movement and compatibility with flying equipment.
Superior Togs Co., Inc. Red Rib Reproduction
This model reproduces the B-10 red-rib version manufactured by Superior Togs Co., Inc., a contractor that also produced flight jackets including the B-15, B-15A, and L-2A. The combination of an olive drab body with red cuffs and waistband gives this version its distinctive appearance.
Buzz Rickson's recreates this configuration with olive drab cotton twill, alpaca-wool pile lining, and a brown sheepskin mouton collar. The dimensional fur collar, flap-covered waist pockets, shoulder epaulets, and contrasting red knit trim reproduce the characteristic appearance of the Superior Togs B-10 while retaining the practical construction of an insulated flight jacket.
100% Cotton Twill Shell
The shell is made from 100% cotton twill. Its closely woven, relatively smooth surface shows fine diagonal twill lines and a restrained sheen. The fabric combines moderate body with suppleness, allowing it to follow the rounded contours of the jacket rather than forming a completely rigid outer layer.
Across the body and sleeves, the cloth bends into gentle folds and natural undulations that contribute to the dimensional appearance of a cloth flight jacket. The olive drab color shifts between lighter and darker tones as surfaces turn toward or away from the light, creating soft shading along folds and creases. With continued wear, the cotton develops creases and a more settled feel in response to the wearer's movement, gradually changing its surface character.
50% Wool and 50% Alpaca Pile Lining
The body and sleeves are lined with a pile fabric composed of 50% wool and 50% alpaca. The raised fibers gather into small tufts, giving the lining an uneven, textured surface. Air held between these fibers forms an insulating layer that helps limit heat loss from inside the jacket.
Along the inside of the front opening, facings made from the same cotton twill as the shell finish and support the front edges. These fabric sections also support the zipper attachment. The pile lining is sewn to the body-side edges of the facings, joining the stable woven material at the opening to the insulating pile used through the rest of the interior.
The pile extends inward from the front facings and upward from the top of the rib-knit waistband, continuing through the body and sleeves. Separate fabric sections are used at the underarms. The interior therefore combines pile lining with front facings, the internal front flap, the waistband, and the underarm inserts according to the construction requirements of each area.
Because the raised pile is exposed inside the jacket, it comes into direct contact with the clothing worn underneath. Depending on the fabric of your inner layer, you may notice friction when putting the jacket on, taking it off, or moving, and some fibers may transfer to that layer. The sensation of natural animal fibers against the skin, including any prickly feeling, also varies from person to person.
Metal Front Zipper with a TALON-Marked Pull and Cowhide Tab
The front closes with a metal zipper. Its pull is marked "TALON" and fitted with a tied cowhide leather tab. Extending the gripping area helps make the zipper easier to operate while wearing gloves. The leather tab can also be removed by untying its knot.
The cotton twill sections along the front opening continue down to the hem, with the rib-knit waistband attached on either side. This arrangement gives the zipper a woven-fabric foundation while allowing the surrounding waistband to stretch around the waist.
Short Internal Storm Flap at the Lower Front
A fabric storm flap is attached behind the zipper on the lower portion of the wearer's right front panel. It runs upward from the hem to approximately the area near the top of the waist pockets, rather than extending all the way to the collar. The upper corner is rounded.
With the zipper closed, this additional layer lies behind the front opening from the lower abdomen to the hem. It helps reduce wind entering through the spaces between the metal zipper teeth and along the front opening, supplementing protection at the lower front of the jacket.
Brown Sheepskin Mouton Collar
The fold-down collar is made from sheepskin mouton, with dense brown fur and rounded collar points. Its color and texture contrast with the olive drab cotton shell, defining the neckline through the difference between woven cloth and fur.
The fur changes in apparent lightness and darkness according to the direction of the nap, the lighting, and the viewing angle. This sheepskin material differs from the alpaca-wool pile used in the lining and gives the collar its own thickness and three-dimensional form.
Cotton Twill Undercollar and Adjustable Chin Strap
The underside of the collar is made from the same olive drab cotton twill as the shell, forming a fabric backing that supports the mouton. When the collar is folded down, the fur faces outward. When raised, the fur turns toward the neck and covers the sides and back, allowing the coverage around the neckline to change with the position of the collar.
A matching cotton twill chin strap is attached to the wearer's left undercollar, on the fabric surface concealed beneath the collar when it is folded down. One end of the strap is sewn in place, while the other has a buttonhole. Two fastening buttons are positioned on the underside of the wearer's right collar.
With the collar raised, the strap can be brought across the throat and secured to either of these two buttons to adjust the opening. Connecting the two sides helps hold the front of the raised collar together and limits the separation of the collar points, supplementing wind protection around the neck.
When the strap is not in use, it folds back beneath the left collar and fastens to a separate storage button. Folding the collar down conceals the strap beneath it. The right-side buttons are therefore used to secure the raised collar, while the left-side button holds the strap in its stored position.
Flap-Covered Front Patch Pockets
Two patch pockets are positioned at the waist on the front of the jacket. Each pocket is made from matching shell fabric sewn onto the outside of the body, with the space between the applied panel and the jacket forming the pocket compartment. The lower corners are cut at an angle, and stitching secures the sides and bottom while leaving the top open for access.
A flap is sewn to the body above each pocket along its upper edge and lifts from below. A vertical buttonhole at the center of the flap fastens over a button on the pocket panel. Covering the opening in this way helps keep the contents from slipping out unintentionally.
The upper corners of the pocket panels and flaps are reinforced with short combinations of stitching. These stitches support the areas that receive repeated strain when the flaps are opened and closed or when objects are placed into and removed from the pockets.
Pen Opening and Internal Divider in the Left Waist Pocket
The wearer's left waist pocket has a pen opening incorporated into part of the flap's upper edge. A fabric divider is sewn inside the pocket to separate the pen compartment from the main storage area.
This arrangement allows a pen to be inserted through the upper opening while the flap remains buttoned closed. The dedicated internal section keeps the pen compartment distinct from the rest of the pocket.
Snap-Fastened Interior Pocket
One interior pocket is positioned inside the wearer's left front panel. Its vertically oriented opening is accessed from the side and sits in the front facing next to the pile lining. Narrow fabric strips finish the edges around the opening.
A single metal snap near the middle secures the opening, providing storage inside the body in addition to the two exterior waist pockets. The brand label and fabric-content label are attached inside this pocket.
Set-In Sleeves with Two-Piece Shell Construction
The sleeves use a set-in construction, with each sleeve cap sewn into the corresponding armhole of the body. Each outer sleeve is formed from two fabric panels sewn together into a tubular shape, with a separate rib-knit cuff attached at the end.
This construction establishes defined shoulder and armhole seams while allowing the sleeve fabric to retain the rounded volume created by the shell and lining.
Red 100% Wool Cuffs with a Stepped Rib Structure
The cuffs are knitted from 100% wool in the distinctive red color of this version. The rib structure changes partway along each cuff: the section nearest the sleeve has broader ribs, while the section that settles around the wrist uses finer ribs.
The elastic knit follows the wrist with moderate tension, helping reduce wind entry at the sleeve openings. It also draws the sleeve ends inward and helps keep them in position, creating a natural narrowing from the fuller cloth sleeve to the wrist.
Red 100% Wool Rib-Knit Waistband
The lower body is finished with a band of red 100% wool rib knit matching the cuffs. It is sewn along the bottom of the body and runs from the front panels around the sides and across the back. At the front opening, its ends join the cotton twill sections alongside the zipper.
The transition from woven cotton to elastic knit allows the hem to follow the waist. As the waistband settles toward the body, it gathers the jacket's volume at the lower edge. Together with the relatively short body length, this creates the waist-length outline associated with the B-10.
The waistband and cuffs also help bring the jacket's openings closer to the body, reducing the movement of air through those openings.
Underarm Insert Panels
Separate panels connect the body and sleeves at the underarms. The use of multiple fabric sections shapes this area in three dimensions and provides for movement at the base of the arms.
Gusset-like inserts appear on the outside, with separate underarm sections also incorporated into the interior. These transitions are positioned to follow the shape of the underarm area.
Button-Fastened Shoulder Epaulets
Both shoulders are fitted with epaulets made from the same cotton twill as the shell. Each is a narrow, elongated tab following the shoulder line, with a pointed end nearest the collar.
The outer end is sewn to the body near the shoulder edge, and the inner pointed end fastens with a button near the collar. This allows the collar-side end to be opened and closed. At the sewn outer attachment, a rectangular outline of stitching with crossing stitches inside reinforces the connection.
Uninterrupted Central Back Panel
The back has no center-back joining seam or horizontal back yoke. This leaves a broad, uninterrupted area of cotton twill through the center of the back.
Army Air Forces Prints on the Left Sleeve and Interior Flap
The wearer's left upper sleeve is printed directly on the fabric with the wing-and-star emblem and the words "ARMY AIR FORCES." This color print reproduces the exterior service marking.
A second wing-and-star emblem with the same wording is printed in a single white color on the matching-fabric flap inside the wearer's right front panel. Positioned where it can be seen when the jacket is open, this interior marking is separate from the color print on the left sleeve. Both the exterior emblem and the white interior print are reproduced as part of the jacket's detailing.
Superior Togs Co., Inc. Reproduction Contractor Label
A reproduction Superior Togs Co., Inc. contractor label is sewn to the pile lining at the inside back neck. The rectangular label reproduces the arrangement of garment identification and contract information found on period labels.
Its text includes "TYPE B-10," "SPECIFICATION NO. 3157," the size, stock number, order number, manufacturer name, "PROPERTY," and "AIR FORCES, U.S. ARMY." The number in the size field corresponds to the tagged size of the individual jacket.
Matching Cotton Twill Hanger Loop
A hanger loop is positioned inside the back neckline above the reproduction contractor label. It is made from a narrow strip of matching shell fabric formed into a band, with both ends sewn in place to create a loop.
Made in Japan
This Japanese-made reproduction brings together the material character and construction details of the Superior Togs B-10 red-rib version. The cotton twill shell, insulating alpaca-wool pile, mouton collar, practical pockets, and adjustable collar strap retain the jacket's roots in protective flying clothing.
The olive drab body, brown fur collar, and red wool knit create the distinctive contrast of this version. Its relatively short body, rounded volume, and ribbed waist give the finished jacket a classic, rugged appearance consistent with its military flight-jacket design.
Buzz Rickson's by Toyo Enterprise Lot No. BR15924 / Type B-10 RED RIB VERSION "SUPERIOR TOGS CO., INC."
Care Instructions
Do not wash at home.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Do not professionally wet clean.
Consult a specialist regarding cleaning.
This jacket combines materials with different care requirements, including a cotton shell, alpaca-wool pile lining, sheepskin collar, wool knit trim, and a leather zipper-pull tab. Please consult a specialist experienced in garments that combine fur, leather, and textiles, and make sure the specialist checks the attached care label before advising on any treatment.
The pile lining and fur collar may show lighter and darker areas depending on the direction of the nap. Because natural materials are used, the fur and pile can also vary in texture and appearance between individual jackets.
Always follow the care instructions attached to the actual product.
Care Instructions for the Buzz Rickson's B-10 Flight Jacket
Washing the entire jacket, tumble drying, and dry cleaning are not recommended.
To faithfully reproduce the original flight jacket, this model combines a cotton shell with a sheepskin collar, an alpaca-and-wool pile lining, wool-knit cuffs and waistband, and a leather zipper pull tab. Exposure to water or heat may cause these materials to shrink or become misshapen, affecting the jacket's overall shape, fit, and appearance.
Dry cleaning may also cause the Army Air Forces markings to fade or disappear completely. Please keep this in mind when considering any cleaning treatment.
For areas that become noticeably soiled, gently wipe the affected area with a cloth dampened with a solution of pH-neutral detergent diluted in water. Always test this method on an inconspicuous area first, as localized cleaning may cause uneven coloration.
Do not deliberately soil, distress, or artificially age the jacket, as doing so may damage its materials and construction.
Storage
Store the jacket on a wide hanger to help maintain its shape. Choose a dry, well-ventilated location, and protect it from dust with a clean, dry towel or a similar breathable covering.
Suitable moth protection and moisture absorbers may help protect the jacket during storage. Periodically check for mold and insect damage, particularly in the wool-knit components.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, a garment may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken manually with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
