Sugar Cane Men's Lightweight Wabash Stripe Jacket (Inspired by 1930s Denim Blouses), 9 oz. 100% Cotton, Unlined, Pleated Front and Cinch Back, One-Wash, Made in Japan (SC16044, 421A Indigo)
할인 가격
$307.46 USD
Free Shipping Worldwide
Sugar Cane Men's Lightweight Wabash Stripe Jacket (Inspired by 1930s Denim Blouses), 9 oz. 100% Cotton, Unlined, Pleated Front and Cinch Back, One-Wash, Made in Japan (SC16044, 421A Indigo)
Sugar Cane
This men's Wabash stripe jacket is made in Japan by Sugar Cane, a Toyo Enterprises brand specializing in vintage-inspired American workwear. The design combines the functional details of 1930s denim blouses with the Wabash stripe fabric used in work clothing of the same period. Made from 9 oz. 100% cotton indigo-dyed fabric with discharge-printed dotted stripes, it features a five-button front, a single flap-covered chest pocket, front pleats secured with box stitching, rear action pleats, and an adjustable cinch back. Black-painted metal tack buttons, rivet reinforcements, and selvage edges along the inside front facings complement its traditional workwear construction. The one-wash finish softens the fabric while preserving moderate body, and the unlined, unpadded construction keeps it suitable for lightweight outerwear. A slightly trim regular fit with a relatively short body length brings these period-inspired details together in a jacket suited to contemporary casual wear, especially in spring and fall.
Size and Fit Guide:
Gender: Men.
Fit: This jacket falls on the slightly slimmer side of a regular fit. It provides moderate room through the chest while keeping excess fullness through the torso and sleeves to a minimum. The shoulders have conventional proportions, and the relatively short body length gives the jacket a clean, compact silhouette. The body follows the wearer's shape naturally without an exaggerated amount of loose fabric.
The set-in sleeves are sewn into conventionally sized armholes that are not excessively wide. With the sleeve attachment seams intended to sit near the shoulder points, this construction creates a defined shoulder line and a natural transition from the shoulders into the sleeves.
The relatively light 9 oz. Wabash stripe fabric has moderate firmness and body while remaining supple. With no lining or insulating fill, the jacket works as a lightweight outer layer, primarily in spring and fall, with its seasonal use varying according to the layers worn underneath.
Your usual US/EU size may be a helpful starting point when choosing your size, but the actual fit will depend on your body type, the thickness of your inner layers, and your preferred amount of room. Please measure a similar jacket that fits you well and compare its chest width, body length, center-back sleeve length, shoulder-to-cuff sleeve length, and shoulder width with the measurements listed below. If you plan to wear thicker layers underneath or prefer a roomier fit, please also consider the next size up after comparing the measurements.
Our model wears Tagged Size 36. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements are taken from the jacket itself laid flat, not from the wearer's body. Width is the straight-across measurement of the garment and does not represent its full chest circumference or the wearer's chest measurement.
In inches
Tagged Size 36
Width: 20.1" / Length: 23.2"
Sleeve: 32.7" (24.4") / Shoulder: 16.9"
Tagged Size 38
Width: 20.9" / Length: 24.0"
Sleeve: 33.1" (24.4") / Shoulder: 17.7"
Tagged Size 40
Width: 22.0" / Length: 24.8"
Sleeve: 33.9" (24.8") / Shoulder: 18.5"
Tagged Size 42
Width: 23.2" / Length: 25.6"
Sleeve: 35.8" (26.0") / Shoulder: 19.7"
Tagged Size 44
Width: 24.4" / Length: 25.6"
Sleeve: 36.2" (26.0") / Shoulder: 20.9"
In centimeters
Tagged Size 36
Width: 51cm / Length: 59cm
Sleeve: 83cm (62cm) / Shoulder: 43cm
Tagged Size 38
Width: 53cm / Length: 61cm
Sleeve: 84cm (62cm) / Shoulder: 45cm
Tagged Size 40
Width: 56cm / Length: 63cm
Sleeve: 86cm (63cm) / Shoulder: 47cm
Tagged Size 42
Width: 59cm / Length: 65cm
Sleeve: 91cm (66cm) / Shoulder: 50cm
Tagged Size 44
Width: 62cm / Length: 65cm
Sleeve: 92cm (66cm) / Shoulder: 53cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Measured with the jacket laid flat and the front buttons fastened, straight across from side to side approximately 3cm (about 1.2 in.) below the underarms. This is a flat width measurement, not the garment's full chest circumference or the wearer's chest measurement.
Length (Body Length): Measured down the back from the center back at the base of the collar, at the seam where the collar joins the body, to the bottom edge of the waistband. The waistband is included, but the height of the collar is not.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff. The full length of the cuff is included.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The measurement in parentheses is taken from the top of the shoulder seam down to the end of the cuff. The full length of the cuff is included.
Shoulder (Shoulder Width): Measured straight across from the top of one shoulder seam to the top of the other.
Made in Japan.
- Brand new and unused.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Slight measurement differences may occur due to individual garment variations and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
1930s Workwear Inspiration
Sugar Cane's 9oz. Wabash Stripe Blouse combines two elements of 1930s American workwear: the construction details of the period's denim blouses and the dotted Wabash stripe fabrics used in work clothing of the same era. In this historical context, "blouse" refers to a jacket-style work garment.
The single flap-covered left chest pocket, pleated front, and rear cinch strap draw on the practical design of those denim blouses. Reinterpreting these details in indigo Wabash stripe fabric brings together the functional construction of the original jacket form and the distinctive patterned appearance of period workwear.
Unlined Construction without Insulating Fill
The jacket is made without a separate lining or insulating fill. The reverse of the outer fabric forms the interior through the body and sleeves, keeping the construction relatively light and allowing the fabric's own texture and suppleness to remain apparent.
This construction makes the jacket suitable as a lightweight outer layer, particularly in spring and fall. Its usefulness across different temperatures depends on the clothing layered underneath.
9 oz. 100% Cotton Indigo Wabash Stripe Fabric
The fabric is a relatively light 9 oz. woven cloth made from 100% cotton. Wabash stripes are a recognizable pattern in vintage American workwear, including clothing historically worn by railroad workers. On this jacket, fine white dots are arranged at regular intervals to form stripes against an indigo-dyed ground.
The pattern is created by discharge printing, a process that selectively removes color from dyed fabric. Each stripe is therefore formed by a sequence of small pale dots rather than one uninterrupted solid line. The contrast between the deep indigo ground and the dotted pattern gives the material its characteristic workwear appearance.
At 9 oz., the fabric has a lighter feel than a heavy outerwear cloth while retaining moderate firmness and body. It is also supple enough to bend naturally, supporting the jacket's shape without making the garment excessively rigid.
Contrasting Stripe Directions across the Garment
The stripes run vertically through the body, while the front yokes, back yoke, cuffs, and rear cinch straps are cut with the stripes running horizontally. Changing the direction of the same dotted pattern distinguishes these components from the main body panels.
These shifts in stripe orientation emphasize the garment's panel construction and add visual variation without introducing a different fabric or contrasting color.
One-Wash Finish
The jacket is washed once during the finishing process. This initial wash softens the fabric's stiffness while preserving moderate body, giving the cloth a more settled, broken-in feel from the first wear.
Compared with an unwashed garment, this treatment helps reduce the likelihood of substantial initial shrinkage during later washing. Some further shrinkage or other dimensional change may still occur, depending on subsequent washing and drying conditions and differences between individual garments. The fabric's texture continues to develop with repeated wear and washing.
Five-Button Front with Integral Facings and Selvage Edges
The front opens fully and fastens with five buttons positioned on the wearer's right side: one at the neckline, three along the body, and one at the waistband. Corresponding horizontal buttonholes are worked into the wearer's left front.
Along both sides of the opening, the body fabric is folded inward to form integral self-fabric facings. This creates two layers of cloth at the button attachment points and buttonholes. The folded sections give the front edges a defined finish and support the areas subjected to repeated pulling during fastening and unfastening.
Selvage edges are positioned along the inner edges of both facings. These woven fabric edges remain visible inside the unlined jacket, adding a traditional construction detail to the front opening.
Turn-Down Shirt Collar without a Separate Collar Stand
The turn-down collar is sewn directly to the neckline without a separate collar stand between the collar and the body. This gives the base of the collar a lower profile than a collar mounted on a separate stand, allowing it to sit naturally around the neck.
Its straightforward construction creates the clean, practical neckline associated with 1930s denim blouses and complements the jacket's button-front design.
Set-In Sleeves and Button Cuffs with Riveted Slit Reinforcement
The sleeves are sewn into the body's armholes using a conventional set-in construction. Each sleeve ends in a cuff made from the same Wabash stripe fabric, with a single button fastening.
A slit extends upward from each cuff into the sleeve. Unfastening the cuff allows this opening to spread, making it easier to pass the hand through the sleeve end. The edges of the slit are folded inward and secured with stitching.
A reinforcing rivet is installed at the upper end of the slit, where stress tends to concentrate when the cuff opening is spread. The rivet supplements the stitching at this point, helping limit tearing and wear around the end of the opening.
Single Left Chest Patch Pocket with a Buttoned Flap
The jacket has one pocket, positioned on the left chest. A separate piece of matching Wabash stripe fabric is sewn directly onto the outside of the body to form a patch pocket, with the space between the patch and the body serving as the storage compartment.
The pocket has a five-sided shape resembling a baseball home plate. Stitching secures its sides and lower edges to the body, while the folded and stitched upper edge forms the pocket opening. Rivets reinforce both upper corners, supporting the areas that receive repeated stress when items are inserted or removed.
The flap above the pocket has diagonally clipped lower corners. Its upper edge is sewn to the body, allowing the lower portion to lift for access. When lowered, it covers the pocket opening from above. A vertical buttonhole at the center of the flap fastens to a button on the pocket itself, helping keep the contents from slipping out unintentionally.
Four Front Pleats Secured with Horizontal Box Stitching
Two vertical pleats run along each side of the front opening, making four pleats in total. They extend from the front yokes to the waistband. The body fabric is folded inward to hold additional cloth within each pleat.
On each front panel, elongated horizontal rectangles of box stitching cross both pleats at three positions: upper, middle, and lower. These spaced stitch boxes retain the folds and control the spread of the front panels without sewing the pleats closed along their full length.
Between the secured sections, the folded fabric can open slightly as the arms move, helping ease pulling across the chest. The combination of vertical folds and horizontal stitch boxes also creates the distinctive front appearance associated with 1930s denim blouses.
Black-Painted Metal Tack Buttons
Black-painted metal tack buttons are used at the front opening, chest pocket, and both cuffs. Each button consists of an outer button body and a metal fastening component inserted from the reverse side of the fabric. The two parts are pressed together to secure the button mechanically through the cloth.
The button faces are stamped with lettering that includes "SUGAR CANE." Their dark painted finish provides a restrained contrast against the indigo dotted stripes. Because the jacket is unlined, the metal fastening components remain visible on the inside at the button attachment points.
Back Yoke, Single Back Panel, and Rear Action Pleats
A back yoke spans the upper back between the shoulders. Beneath it, the main back panel extends to the top of the waistband as one continuous piece of fabric without a center seam.
Vertical action pleats run along both sides of this back panel, from the yoke to the waistband. The folds are secured where they meet the yoke above and the waistband below, while the sections between these junctions remain unstitched.
Unlike the front pleats, which are held at intervals with horizontal box stitching, the back pleats are retained at their upper and lower attachment points. This arrangement provides additional room across the back and allows the folded cloth to respond more freely to shoulder and arm movement.
Adjustable Cinch Back with Riveted Strap Attachments
A cinch-back assembly sits near the lower back, immediately above the waistband. Two straps made from the same Wabash stripe fabric extend inward from opposite sides and connect through a metal buckle at the center.
Each strap is secured to the body with box stitching and rivet reinforcement. Tightening the straps draws their attachment points toward the center, gathering the intervening back-panel fabric. This reduces fullness across the lower back and adjusts the fit around the hem.
Precautions for the Metal Buckle and Exposed Rivets
The cinch-back buckle and exposed rivets may come into contact with backrests or other surfaces, particularly when sitting. Firm pressure or rubbing against car seats, sofas, chairs, or painted furniture may scratch or otherwise damage the contacted surface. Please take care to keep the metal hardware from pressing or rubbing against these surfaces during wear.
Self-Fabric Waistband
The lower edge of the body is finished with a separate band made from the same Wabash stripe fabric. This waistband is sewn to the body to give the hem a defined shape and a structured lower edge.
At the front, the lowest button and its corresponding buttonhole are positioned at the ends of the waistband. Fastening this button overlaps the two front ends and closes the jacket at the hem.
Boot-Motif Branding on the Reverse of the Fabric
The reverse of the fabric carries a printed boot motif incorporating the "SUGAR CANE" name and wording such as "HIGHEST QUALITY" and "TRADE MARK." The design uses traditional workwear-style lettering and imagery.
These prints appear on the inside of the body and sleeves and on the underside of the chest-pocket flap. Since there is no separate lining, the printed reverse of the cloth remains visible as part of the garment's interior construction.
Locomotive Neck Label and Visible Attachment Stitching
A fabric label printed with a steam locomotive illustration and lettering that includes "SUGAR CANE" is positioned inside the back neckline. The label is sewn directly onto the back yoke around its perimeter.
Because the stitching passes through the yoke of the unlined jacket, the rectangular outline of the label's attachment also appears on the outside of the upper back. This visible stitch outline follows the way the interior label is attached.
Made in Japan
This jacket is made in Japan, combining the practical details of 1930s denim blouses with indigo-dyed Wabash stripe fabric. The dotted pattern, pleated front, action back, rivet reinforcements, tack buttons, and adjustable rear cinch each contribute to its interpretation of traditional American workwear.
Its slightly trim regular fit and relatively short body length give these period-inspired details clean proportions, while the supple one-wash fabric and unlined construction keep the jacket suited to everyday use as a lightweight outer layer.
Indigo Fading and Color Transfer
The indigo-dyed fabric gradually fades and develops variations in shade with wear and washing. Raised or thicker areas, such as seams and folded edges, experience friction differently from the flatter body panels, so the resulting color changes may not be uniform.
Indigo color may also transfer through rubbing, perspiration, or moisture to other clothing, bags, seating, and nearby surfaces. Please follow the garment's care label for washing and drying, and take care to avoid color transfer and unwanted dimensional changes.
Care Instructions
Machine wash on a gentle cycle at a maximum water temperature of 30°C (86°F).
Do not bleach.
Do not tumble dry.
Line dry in the shade.
Iron on a low heat setting with a pressing cloth.
Professional dry cleaning with petroleum-based solvents, using a gentle process, is permitted.
Turn the jacket inside out before washing, and wash it separately from other garments to help prevent color transfer. Always use a pressing cloth when ironing.
Do not leave the garment wet for an extended period, as this may cause discoloration. If it becomes wet from rain or other moisture, allow it to dry promptly, following the drying instructions above.
Friction may transfer color to light-colored belts, bags, and other belongings, as well as sofas and car seats. Please also take particular care when wearing the jacket with white or light-colored clothing.
For storage, avoid stacking the jacket with other items and keep it away from high temperatures and humidity. Choose a well-ventilated location away from direct sunlight and direct exposure to artificial lighting. To reduce the risk of color transfer, keep the garment from resting against other clothing or objects during storage.
The jacket has been washed once during production. Some further shrinkage or other dimensional change may still occur depending on subsequent washing and drying conditions and individual garment variations.
Always follow the care instructions attached to the actual product.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken manually with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
Sugar Cane
This men's Wabash stripe jacket is made in Japan by Sugar Cane, a Toyo Enterprises brand specializing in vintage-inspired American workwear. The design combines the functional details of 1930s denim blouses with the Wabash stripe fabric used in work clothing of the same period. Made from 9 oz. 100% cotton indigo-dyed fabric with discharge-printed dotted stripes, it features a five-button front, a single flap-covered chest pocket, front pleats secured with box stitching, rear action pleats, and an adjustable cinch back. Black-painted metal tack buttons, rivet reinforcements, and selvage edges along the inside front facings complement its traditional workwear construction. The one-wash finish softens the fabric while preserving moderate body, and the unlined, unpadded construction keeps it suitable for lightweight outerwear. A slightly trim regular fit with a relatively short body length brings these period-inspired details together in a jacket suited to contemporary casual wear, especially in spring and fall.
Size and Fit Guide:
Gender: Men.
Fit: This jacket falls on the slightly slimmer side of a regular fit. It provides moderate room through the chest while keeping excess fullness through the torso and sleeves to a minimum. The shoulders have conventional proportions, and the relatively short body length gives the jacket a clean, compact silhouette. The body follows the wearer's shape naturally without an exaggerated amount of loose fabric.
The set-in sleeves are sewn into conventionally sized armholes that are not excessively wide. With the sleeve attachment seams intended to sit near the shoulder points, this construction creates a defined shoulder line and a natural transition from the shoulders into the sleeves.
The relatively light 9 oz. Wabash stripe fabric has moderate firmness and body while remaining supple. With no lining or insulating fill, the jacket works as a lightweight outer layer, primarily in spring and fall, with its seasonal use varying according to the layers worn underneath.
Your usual US/EU size may be a helpful starting point when choosing your size, but the actual fit will depend on your body type, the thickness of your inner layers, and your preferred amount of room. Please measure a similar jacket that fits you well and compare its chest width, body length, center-back sleeve length, shoulder-to-cuff sleeve length, and shoulder width with the measurements listed below. If you plan to wear thicker layers underneath or prefer a roomier fit, please also consider the next size up after comparing the measurements.
Our model wears Tagged Size 36. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements are taken from the jacket itself laid flat, not from the wearer's body. Width is the straight-across measurement of the garment and does not represent its full chest circumference or the wearer's chest measurement.
In inches
Tagged Size 36
Width: 20.1" / Length: 23.2"
Sleeve: 32.7" (24.4") / Shoulder: 16.9"
Tagged Size 38
Width: 20.9" / Length: 24.0"
Sleeve: 33.1" (24.4") / Shoulder: 17.7"
Tagged Size 40
Width: 22.0" / Length: 24.8"
Sleeve: 33.9" (24.8") / Shoulder: 18.5"
Tagged Size 42
Width: 23.2" / Length: 25.6"
Sleeve: 35.8" (26.0") / Shoulder: 19.7"
Tagged Size 44
Width: 24.4" / Length: 25.6"
Sleeve: 36.2" (26.0") / Shoulder: 20.9"
In centimeters
Tagged Size 36
Width: 51cm / Length: 59cm
Sleeve: 83cm (62cm) / Shoulder: 43cm
Tagged Size 38
Width: 53cm / Length: 61cm
Sleeve: 84cm (62cm) / Shoulder: 45cm
Tagged Size 40
Width: 56cm / Length: 63cm
Sleeve: 86cm (63cm) / Shoulder: 47cm
Tagged Size 42
Width: 59cm / Length: 65cm
Sleeve: 91cm (66cm) / Shoulder: 50cm
Tagged Size 44
Width: 62cm / Length: 65cm
Sleeve: 92cm (66cm) / Shoulder: 53cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Measured with the jacket laid flat and the front buttons fastened, straight across from side to side approximately 3cm (about 1.2 in.) below the underarms. This is a flat width measurement, not the garment's full chest circumference or the wearer's chest measurement.
Length (Body Length): Measured down the back from the center back at the base of the collar, at the seam where the collar joins the body, to the bottom edge of the waistband. The waistband is included, but the height of the collar is not.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff. The full length of the cuff is included.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The measurement in parentheses is taken from the top of the shoulder seam down to the end of the cuff. The full length of the cuff is included.
Shoulder (Shoulder Width): Measured straight across from the top of one shoulder seam to the top of the other.
Made in Japan.
- Brand new and unused.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Slight measurement differences may occur due to individual garment variations and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
1930s Workwear Inspiration
Sugar Cane's 9oz. Wabash Stripe Blouse combines two elements of 1930s American workwear: the construction details of the period's denim blouses and the dotted Wabash stripe fabrics used in work clothing of the same era. In this historical context, "blouse" refers to a jacket-style work garment.
The single flap-covered left chest pocket, pleated front, and rear cinch strap draw on the practical design of those denim blouses. Reinterpreting these details in indigo Wabash stripe fabric brings together the functional construction of the original jacket form and the distinctive patterned appearance of period workwear.
Unlined Construction without Insulating Fill
The jacket is made without a separate lining or insulating fill. The reverse of the outer fabric forms the interior through the body and sleeves, keeping the construction relatively light and allowing the fabric's own texture and suppleness to remain apparent.
This construction makes the jacket suitable as a lightweight outer layer, particularly in spring and fall. Its usefulness across different temperatures depends on the clothing layered underneath.
9 oz. 100% Cotton Indigo Wabash Stripe Fabric
The fabric is a relatively light 9 oz. woven cloth made from 100% cotton. Wabash stripes are a recognizable pattern in vintage American workwear, including clothing historically worn by railroad workers. On this jacket, fine white dots are arranged at regular intervals to form stripes against an indigo-dyed ground.
The pattern is created by discharge printing, a process that selectively removes color from dyed fabric. Each stripe is therefore formed by a sequence of small pale dots rather than one uninterrupted solid line. The contrast between the deep indigo ground and the dotted pattern gives the material its characteristic workwear appearance.
At 9 oz., the fabric has a lighter feel than a heavy outerwear cloth while retaining moderate firmness and body. It is also supple enough to bend naturally, supporting the jacket's shape without making the garment excessively rigid.
Contrasting Stripe Directions across the Garment
The stripes run vertically through the body, while the front yokes, back yoke, cuffs, and rear cinch straps are cut with the stripes running horizontally. Changing the direction of the same dotted pattern distinguishes these components from the main body panels.
These shifts in stripe orientation emphasize the garment's panel construction and add visual variation without introducing a different fabric or contrasting color.
One-Wash Finish
The jacket is washed once during the finishing process. This initial wash softens the fabric's stiffness while preserving moderate body, giving the cloth a more settled, broken-in feel from the first wear.
Compared with an unwashed garment, this treatment helps reduce the likelihood of substantial initial shrinkage during later washing. Some further shrinkage or other dimensional change may still occur, depending on subsequent washing and drying conditions and differences between individual garments. The fabric's texture continues to develop with repeated wear and washing.
Five-Button Front with Integral Facings and Selvage Edges
The front opens fully and fastens with five buttons positioned on the wearer's right side: one at the neckline, three along the body, and one at the waistband. Corresponding horizontal buttonholes are worked into the wearer's left front.
Along both sides of the opening, the body fabric is folded inward to form integral self-fabric facings. This creates two layers of cloth at the button attachment points and buttonholes. The folded sections give the front edges a defined finish and support the areas subjected to repeated pulling during fastening and unfastening.
Selvage edges are positioned along the inner edges of both facings. These woven fabric edges remain visible inside the unlined jacket, adding a traditional construction detail to the front opening.
Turn-Down Shirt Collar without a Separate Collar Stand
The turn-down collar is sewn directly to the neckline without a separate collar stand between the collar and the body. This gives the base of the collar a lower profile than a collar mounted on a separate stand, allowing it to sit naturally around the neck.
Its straightforward construction creates the clean, practical neckline associated with 1930s denim blouses and complements the jacket's button-front design.
Set-In Sleeves and Button Cuffs with Riveted Slit Reinforcement
The sleeves are sewn into the body's armholes using a conventional set-in construction. Each sleeve ends in a cuff made from the same Wabash stripe fabric, with a single button fastening.
A slit extends upward from each cuff into the sleeve. Unfastening the cuff allows this opening to spread, making it easier to pass the hand through the sleeve end. The edges of the slit are folded inward and secured with stitching.
A reinforcing rivet is installed at the upper end of the slit, where stress tends to concentrate when the cuff opening is spread. The rivet supplements the stitching at this point, helping limit tearing and wear around the end of the opening.
Single Left Chest Patch Pocket with a Buttoned Flap
The jacket has one pocket, positioned on the left chest. A separate piece of matching Wabash stripe fabric is sewn directly onto the outside of the body to form a patch pocket, with the space between the patch and the body serving as the storage compartment.
The pocket has a five-sided shape resembling a baseball home plate. Stitching secures its sides and lower edges to the body, while the folded and stitched upper edge forms the pocket opening. Rivets reinforce both upper corners, supporting the areas that receive repeated stress when items are inserted or removed.
The flap above the pocket has diagonally clipped lower corners. Its upper edge is sewn to the body, allowing the lower portion to lift for access. When lowered, it covers the pocket opening from above. A vertical buttonhole at the center of the flap fastens to a button on the pocket itself, helping keep the contents from slipping out unintentionally.
Four Front Pleats Secured with Horizontal Box Stitching
Two vertical pleats run along each side of the front opening, making four pleats in total. They extend from the front yokes to the waistband. The body fabric is folded inward to hold additional cloth within each pleat.
On each front panel, elongated horizontal rectangles of box stitching cross both pleats at three positions: upper, middle, and lower. These spaced stitch boxes retain the folds and control the spread of the front panels without sewing the pleats closed along their full length.
Between the secured sections, the folded fabric can open slightly as the arms move, helping ease pulling across the chest. The combination of vertical folds and horizontal stitch boxes also creates the distinctive front appearance associated with 1930s denim blouses.
Black-Painted Metal Tack Buttons
Black-painted metal tack buttons are used at the front opening, chest pocket, and both cuffs. Each button consists of an outer button body and a metal fastening component inserted from the reverse side of the fabric. The two parts are pressed together to secure the button mechanically through the cloth.
The button faces are stamped with lettering that includes "SUGAR CANE." Their dark painted finish provides a restrained contrast against the indigo dotted stripes. Because the jacket is unlined, the metal fastening components remain visible on the inside at the button attachment points.
Back Yoke, Single Back Panel, and Rear Action Pleats
A back yoke spans the upper back between the shoulders. Beneath it, the main back panel extends to the top of the waistband as one continuous piece of fabric without a center seam.
Vertical action pleats run along both sides of this back panel, from the yoke to the waistband. The folds are secured where they meet the yoke above and the waistband below, while the sections between these junctions remain unstitched.
Unlike the front pleats, which are held at intervals with horizontal box stitching, the back pleats are retained at their upper and lower attachment points. This arrangement provides additional room across the back and allows the folded cloth to respond more freely to shoulder and arm movement.
Adjustable Cinch Back with Riveted Strap Attachments
A cinch-back assembly sits near the lower back, immediately above the waistband. Two straps made from the same Wabash stripe fabric extend inward from opposite sides and connect through a metal buckle at the center.
Each strap is secured to the body with box stitching and rivet reinforcement. Tightening the straps draws their attachment points toward the center, gathering the intervening back-panel fabric. This reduces fullness across the lower back and adjusts the fit around the hem.
Precautions for the Metal Buckle and Exposed Rivets
The cinch-back buckle and exposed rivets may come into contact with backrests or other surfaces, particularly when sitting. Firm pressure or rubbing against car seats, sofas, chairs, or painted furniture may scratch or otherwise damage the contacted surface. Please take care to keep the metal hardware from pressing or rubbing against these surfaces during wear.
Self-Fabric Waistband
The lower edge of the body is finished with a separate band made from the same Wabash stripe fabric. This waistband is sewn to the body to give the hem a defined shape and a structured lower edge.
At the front, the lowest button and its corresponding buttonhole are positioned at the ends of the waistband. Fastening this button overlaps the two front ends and closes the jacket at the hem.
Boot-Motif Branding on the Reverse of the Fabric
The reverse of the fabric carries a printed boot motif incorporating the "SUGAR CANE" name and wording such as "HIGHEST QUALITY" and "TRADE MARK." The design uses traditional workwear-style lettering and imagery.
These prints appear on the inside of the body and sleeves and on the underside of the chest-pocket flap. Since there is no separate lining, the printed reverse of the cloth remains visible as part of the garment's interior construction.
Locomotive Neck Label and Visible Attachment Stitching
A fabric label printed with a steam locomotive illustration and lettering that includes "SUGAR CANE" is positioned inside the back neckline. The label is sewn directly onto the back yoke around its perimeter.
Because the stitching passes through the yoke of the unlined jacket, the rectangular outline of the label's attachment also appears on the outside of the upper back. This visible stitch outline follows the way the interior label is attached.
Made in Japan
This jacket is made in Japan, combining the practical details of 1930s denim blouses with indigo-dyed Wabash stripe fabric. The dotted pattern, pleated front, action back, rivet reinforcements, tack buttons, and adjustable rear cinch each contribute to its interpretation of traditional American workwear.
Its slightly trim regular fit and relatively short body length give these period-inspired details clean proportions, while the supple one-wash fabric and unlined construction keep the jacket suited to everyday use as a lightweight outer layer.
Indigo Fading and Color Transfer
The indigo-dyed fabric gradually fades and develops variations in shade with wear and washing. Raised or thicker areas, such as seams and folded edges, experience friction differently from the flatter body panels, so the resulting color changes may not be uniform.
Indigo color may also transfer through rubbing, perspiration, or moisture to other clothing, bags, seating, and nearby surfaces. Please follow the garment's care label for washing and drying, and take care to avoid color transfer and unwanted dimensional changes.
Care Instructions
Machine wash on a gentle cycle at a maximum water temperature of 30°C (86°F).
Do not bleach.
Do not tumble dry.
Line dry in the shade.
Iron on a low heat setting with a pressing cloth.
Professional dry cleaning with petroleum-based solvents, using a gentle process, is permitted.
Turn the jacket inside out before washing, and wash it separately from other garments to help prevent color transfer. Always use a pressing cloth when ironing.
Do not leave the garment wet for an extended period, as this may cause discoloration. If it becomes wet from rain or other moisture, allow it to dry promptly, following the drying instructions above.
Friction may transfer color to light-colored belts, bags, and other belongings, as well as sofas and car seats. Please also take particular care when wearing the jacket with white or light-colored clothing.
For storage, avoid stacking the jacket with other items and keep it away from high temperatures and humidity. Choose a well-ventilated location away from direct sunlight and direct exposure to artificial lighting. To reduce the risk of color transfer, keep the garment from resting against other clothing or objects during storage.
The jacket has been washed once during production. Some further shrinkage or other dimensional change may still occur depending on subsequent washing and drying conditions and individual garment variations.
Always follow the care instructions attached to the actual product.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken manually with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.