Studio D'artisan Men's Vintage-Inspired 14 oz. Heavyweight Hickory Stripe Long-Sleeve Work Shirt, 100% Cotton, One-Wash, Made in Japan (SDA D5335H, Navy and Off-White)

Studio D'artisan Men's Vintage-Inspired 14 oz. Heavyweight Hickory Stripe Long-Sleeve Work Shirt, 100% Cotton, One-Wash, Made in Japan (SDA D5335H, Navy and Off-White)

Studio D'artisan

This men's heavyweight hickory stripe long-sleeve work shirt is made in Japan by Studio D'artisan. Based on the practical construction of classic American work shirts, it combines vintage-inspired workwear details with a substantial 14 oz. fabric woven from 100% cotton. The navy and off-white stripes give the cloth its traditional hickory appearance, while the dense weave provides pronounced thickness, weight, and a firm, full-bodied hand.

The design includes a regular shirt collar with a separate collar stand, a reinforced six-button front, buttoned chest patch pockets with deliberately offset placement, a left chest pen opening, single-button cuffs and buttoned sleeve plackets, cat's-eye buttons, a double-layer back yoke, a rounded shirttail hem, triangular side gussets, chainstitch run-offs, and double-needle felled seams. A one-wash finish moderates the initial stiffness without removing the substance of the heavyweight cloth. The balanced regular fit allows the shirt to be worn on its own, over a T-shirt as a shirt jacket, or beneath outerwear, bringing the construction and texture of traditional workwear into everyday casual wear.

Size and Fit Guide:

Gender: Men.

The shirt has a balanced regular fit that is neither excessively slim nor overly loose. Its 14 oz. denim has considerably more thickness and substance than ordinary shirting, allowing it to be worn as a conventional button-up shirt or layered over a T-shirt as a shirt jacket. With repeated wear and washing, the denim gradually breaks in and conforms more naturally to the wearer's body.

The set-in sleeves provide defined shoulder and armhole seams, while the rounded shirttail hem sits lower at the center front and back and rises toward the sides. These construction details give the garment the outline of a classic work shirt, with the more substantial presence of heavyweight denim.

Actual fit will depend on your body type, preferred fit, and the thickness of any layers worn underneath. To help select your size, please lay flat and measure a similar heavyweight denim shirt or denim jacket that fits you well, then compare its chest width, body length, center-back sleeve length, shoulder-to-cuff sleeve length, and shoulder width with the measurements below. Please allow for the layers you intend to wear when making this comparison.

Our model wears Tagged Size 38. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.

The following measurements show the garment itself, not your body measurements. Width is the flat measurement across the garment and represents half of the garment's chest circumference, not the full circumference or the wearer's chest size.

---

In inches

Tagged Size 36
Width: 20.1" / Length: 26.4"
Sleeve: 31.5" (23.6") / Shoulder: 16.1"

Tagged Size 38
Width: 20.9" / Length: 27.6"
Sleeve: 32.7" (24.4") / Shoulder: 16.9"

Tagged Size 40
Width: 22.0" / Length: 28.7"
Sleeve: 34.3" (25.2") / Shoulder: 18.1"

Tagged Size 42
Width: 23.2" / Length: 29.1"
Sleeve: 35.4" (26.0") / Shoulder: 19.3"

Tagged Size 44
Width: 24.4" / Length: 29.9"
Sleeve: 36.2" (26.4") / Shoulder: 20.1"

---

In centimeters

Tagged Size 36
Width: 51cm / Length: 67cm
Sleeve: 80cm (60cm) / Shoulder: 41cm

Tagged Size 38
Width: 53cm / Length: 70cm
Sleeve: 83cm (62cm) / Shoulder: 43cm

Tagged Size 40
Width: 56cm / Length: 73cm
Sleeve: 87cm (64cm) / Shoulder: 46cm

Tagged Size 42
Width: 59cm / Length: 74cm
Sleeve: 90cm (66cm) / Shoulder: 49cm

Tagged Size 44
Width: 62cm / Length: 76cm
Sleeve: 92cm (67cm) / Shoulder: 51cm

---

[How We Measure the Actual Garment]

Width (Chest Width / Half Chest): Lay the garment flat and measure straight across from side to side, approximately 3cm (about 1.2 in.) below the underarms.

Length (Body Length): Measured from the base of the back collar, at the seam where the collar joins the body, straight down to the bottom of the hem. The height of the collar is not included.

Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff.

Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The sleeve measurement shown in parentheses is taken from the top of the shoulder seam down to the end of the cuff.

Shoulder (Shoulder Width): Measured straight across the back from one shoulder seam to the other.

Made in Japan.
- Brand new, in unused condition.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Please note that slight variations in measurements may occur due to individual garment differences and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.

---

14 oz. Heavyweight 100% Cotton Hickory Stripe Fabric
The shirt is made from 14 oz. heavyweight hickory stripe fabric woven from 100% cotton. Navy and off-white yarns form the striped pattern within the cloth, giving it the distinctive appearance associated with traditional American workwear. The pattern comes from the arrangement of the colored yarns in the woven fabric.

The combination of contrasting stripes and substantial cotton cloth gives the surface a rugged, clearly defined character. Its weight is considerable for a shirt fabric, making the material suitable for a work shirt that can also be worn as an overshirt or shirt jacket over a T-shirt.

Vertical Body Stripes with Horizontal Yoke and Cuff Stripes
The hickory stripes run vertically through the body, while the back yoke and cuffs are arranged with the stripes running horizontally. This change in direction introduces visual variation within the same navy and off-white fabric, using the orientation of the pattern to distinguish these components from the body.

Dense Weave, Firm Body, and Gradual Break-In
The fabric is densely woven, producing the thickness, weight, and firm body characteristic of a substantial 14 oz. workwear cloth. Compared with ordinary shirting, it has a more pronounced physical presence and a sturdy hand. Its thickness describes the depth of the cloth, while its firmness gives it resistance to bending and a structured feel when worn.

Despite that substantial construction, the cotton retains natural flexibility. The material begins with noticeable crispness and body, then gradually becomes more pliable through wear and washing. As the cloth settles, it follows the wearer's movements more readily and develops a more familiar, broken-in feel while retaining the textured character of heavyweight hickory stripe fabric.

One-Wash Finish and Dimensional Changes
The shirt is washed once during the finishing process. This initial wash reduces the pronounced stiffness associated with unwashed heavyweight cloth, giving the hickory fabric a more settled feel from the beginning while preserving its firmness and substantial body.

Because the garment has already undergone an initial wash, substantial shrinkage during subsequent laundering is less likely than with an unwashed garment. This does not mean the dimensions are permanently fixed. The 100% cotton fabric may still undergo some further shrinkage or other dimensional change depending on the washing method, drying conditions, and differences between individual garments.

Indigo Fading and Individual Wear Patterns
With repeated wear and washing, the heavyweight hickory cloth gradually conforms to the wearer and loses some of its initial stiffness. At the same time, the indigo-dyed blue portions develop natural variations in shade and areas of fading, changing the contrast between the navy and off-white stripes.

Fading tends to become more visible in areas that repeatedly bend or experience friction, including the collar fold, front placket, yoke seams, pocket edges, elbows, cuffs, and hem. At the seams, the thickness of the folded and joined fabric creates raised areas that can develop localized wear highlights. These variations work together with the creases and surface texture of the cloth to give the striped fabric a more dimensional appearance.

The placement and intensity of the fading, as well as the way the fabric softens, depend on the wearer's movements, frequency of use, and laundering habits. Each shirt therefore develops its own pattern of wear over time.

Regular Shirt Collar with a Separate Collar Stand
The neckline uses a conventional fold-over shirt collar supported by a separate collar stand. The stand forms the base beneath the collar and supports it around the neck, giving the collar area a defined, three-dimensional shape.

This construction provides a structured foundation for the fold-over collar while preserving the straightforward appearance of a classic work shirt.

Six-Button Front with Reinforced Placket Construction
The shirt opens fully at the front and closes with six buttons, including the button at the neckline. The buttons are positioned along the wearer's right front edge. On this side, the body fabric is turned inward to form a double-layer edge that serves as both an integral facing and reinforcement for the button attachment area.

The wearer's left front has a separately cut strip of matching fabric, doubled and sewn in place to form the buttonhole placket. Vertically oriented buttonholes correspond to the buttons on the opposite side. These layered front edges reinforce the opening and give the closure additional substance where it is repeatedly handled during fastening and unfastening.

The space between the first and second buttons is slightly shorter than the spacing between the remaining buttons. This arrangement helps keep the neckline from opening too far when only the top button is left undone.

Buttoned Chest Patch Pockets with Deliberately Offset Placement
A patch pocket is sewn directly onto the outside of each front body panel. The two pockets are intentionally positioned at slightly different heights, reproducing a detail found on vintage work shirts. Please note that this subtle difference in height is part of the design and is not a manufacturing defect.

Each pocket has angled lower corners. The upper edge is turned inward to form a double-layer opening and secured with stitching, reinforcing the area that is handled when items are inserted or removed.

A vertical buttonhole is positioned at the center of each reinforced pocket opening. It fastens to a button attached to the shirt body, securing the upper edge of the pocket directly to the front panel.

Left Chest Pen Opening and Bar-Tack Reinforcement
The opening of the wearer's left chest pocket includes an additional horizontal, buttonhole-style slot that can be used to hold a pen. This opening is separate from the vertical buttonhole used to close the pocket and adds a small practical detail associated with traditional work shirts.

Both upper corners of each chest pocket are reinforced with bar-tack stitching. The concentrated stitches support the corners where tension can accumulate as the pocket is used or pulled. Together with the folded double-layer opening, this reinforcement helps the pocket mouth withstand the repeated loading associated with everyday use.

Set-In Sleeves with Single-Panel Construction
The sleeves use a conventional set-in construction, with each sleeve sewn into an armhole in the body. The attachment seam defines the transition from the shoulder to the sleeve and gives the upper body the established structure of a traditional woven shirt.

Each sleeve is formed from a single fabric panel whose edges are joined along the underside to create a tube. This underside seam closes the sleeve, while the set-in armhole seam joins it to the body.

Single-Button Cuffs and Buttoned Sleeve Plackets
Each sleeve ends in a cuff secured by one button. Above the cuff, the sleeve opening is finished with a separate buttoned placket, also fitted with one button.

Unfastening both the cuff and placket buttons allows the sleeve end to open more widely, making it easier to pass the hand through when putting the shirt on or taking it off. The placket also reinforces the edges of the sleeve slit, supporting the opening where the fabric is repeatedly spread and handled.

Cat's-Eye Buttons with Recessed Thread Channels
Cat's-eye buttons are used throughout the shirt. Each button has an elongated recessed channel across the center of its face, creating the distinctive shape that gives this button style its name.

The attachment thread sits within this recessed area, reducing how far it projects above the button face. This helps limit direct exposure to rubbing and snagging, offering some protection against thread wear. The detail combines the recognizable appearance of traditional workwear buttons with a practical approach to protecting the stitching that holds them in place.

Double-Layer Back Yoke without Back Pleats
The upper back is constructed with a double-layer fabric yoke. The two layers reinforce the shoulder and upper-back area, adding support and stability where the garment is subjected to movement and tension.

The back panel below the yoke is made without pleats. This keeps the rear appearance clean and straightforward, with the yoke seam defining the transition between the reinforced upper section and the main back panel.

Rounded Shirttail Hem
The front and back hems sit lower at their centers and curve upward toward the side seams. This rounded shirttail shape follows the traditional lower outline of a classic work shirt.

When the shirt is worn untucked, the gentle front and back curves create a natural hemline. The curved outline also retains a clearly recognizable shirt shape when the substantial fabric is worn over a T-shirt as a shirt jacket.

Triangular Side Gussets
Small triangular fabric gussets reinforce the hem at the lower end of each side seam. These inserts support the junction where the side seam terminates and the curved front and back hems meet.

Body movement and pulling at the hem can concentrate tension in this area. The gussets help distribute that force across the reinforced junction, reducing strain at the seam end and hem edges and helping limit tearing or fraying. This is a practical durability detail also found on older work shirts.

Twin Chainstitch Run-Offs at the Side Hems
Two chains of thread extend from the end of the side-seam stitching at the hem. These run-offs are formed when chainstitch sewing continues beyond the edge of the fabric, leaving a sequence of connected thread loops without fabric inside them.

The extensions are deliberately left in place to reproduce the sewing details seen on vintage work shirts. They are a continuation of the seam stitching, not separate decorative cords. Their length and the way the thread chains hang or gather may vary slightly between individual garments.

Double-Needle Felled Seam Construction
Major joining areas, including the side seams, shoulders, armholes, and back yoke, use double-needle felled seams. In this construction, the fabric edges are folded into the seam and secured with two parallel rows of stitching, enclosing the seam allowances within the folded join.

This creates a durable connection between the fabric panels and keeps the cut edges contained at areas exposed to repeated movement and tension. The two rows of stitching remain visible on the outside, outlining the garment's construction and adding the characteristic stitchwork of traditional workwear.

Made in Japan
This Studio D'artisan work shirt is made in Japan. Its reinforced front opening, buttoned patch pockets, double-layer back yoke, side gussets, and felled seams combine the practical construction of a classic work shirt with the thickness and weight of 14 oz. cotton hickory stripe fabric.

The one-wash finish provides a settled starting point for a cloth that continues to soften and develop individual fading through use. With a balanced regular fit and a traditional rounded hem, the shirt preserves the character of vintage-inspired workwear while remaining suited to everyday wear on its own, over a T-shirt, or beneath outerwear.

---

Care Instructions
Machine wash on a gentle cycle at a maximum water temperature of 40°C (104°F).
Do not use chlorine bleach or oxygen bleach.
Iron on a medium setting with a pressing cloth between the iron and the fabric.
Do not dry clean.

The garment has been washed once during production. Some further shrinkage or other dimensional change may still occur depending on the washing method, drying conditions, and differences between individual garments.

Always follow the care instructions attached to the actual product.

Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.